FS: S13/SR20 Parts
List:
- Dash, has cracks
- Turbo oil inlet line
- AroSpeed front strut tower bar
- Interior A/C Control - Includes Actuator Cable | The "A/C" button is scratched off
- Custom diamond plate spark plug wire cover (goes on sr20 valve cover)
- Megan style turbo manifold for sr20det (Has broken exhaust stud)=SOLD
- Stock KA Exhaust manifold w/ 1 Oxygen sensor
- 2 Headlight lids with motors | Red Paint
- 2 Headlights
- Driveshaft =SOLD
- Clutch Pressure plate for SR20 (unknow brand)
- Flywheel for sr20 (has surface rust, reccomend resurfacing)
- 2 new throwout bearings for sr20
- KA Twin Cam valve cover w/ all spark plug holder clips
- 2 Rear Brake/Turn signal assemblies (driver and pass) | has white paint on them
- 2 Maxima Single piston front calipers & mounting hardware (painted red)
- 2 Maxima front rotors
- 2 Clutch fans w/ clutches
- fan clutch
- 2 T25/T28 5 bolt turbo exhaust outlets
- Stock Radiator =SOLD
- Altima Dual fan w/ wiring =SOLD
- 2 Different fuse covers (one has yellow writing the other white, different sizes)
- Generic Shift Knob
- Set of heater core hoses
- 3 4x114.3 Black Steel rims | 2 w/ tires, (20% tread)
- 2.5" Exhaust w/ T5 Top Speed Pro 1 Muffler
- Custom throttle cable bracket for sr20
- Brake Master Cylinder | Non-ABS
- 2 Turbos
- One is a Garrett T25 right off of my old car, it has back and forth shaft play and burns oil
- The other it a T25/T28 Hybrid turbo with generic covers and Garrett internals that has side by side shaft play
* Both turbos come with the waste gate actuators, oil outlets, and one of them will have the metal air intake elbow.* = Both turbos are sold!
- Brand new exhaust stud for header.
- Brand new turbo outlet gasket
+ I am not sure if the following items are for a KA or for an SR20, you'd have to come check them out for yourself +
- 3 Radiator hose, all different sizes
- Alternator
- Power Steering Pump
If you have any questions, feel free to ask. Sorry, I don't have any pictures because I'm a brokeass mother fucker who can't afford a digital camera. I am located in the St. Pete area.
Thanks!
- Christian V.
- Dash, has cracks
- Turbo oil inlet line
- AroSpeed front strut tower bar
- Interior A/C Control - Includes Actuator Cable | The "A/C" button is scratched off
- Custom diamond plate spark plug wire cover (goes on sr20 valve cover)
- Megan style turbo manifold for sr20det (Has broken exhaust stud)=SOLD
- Stock KA Exhaust manifold w/ 1 Oxygen sensor
- 2 Headlight lids with motors | Red Paint
- 2 Headlights
- Driveshaft =SOLD
- Clutch Pressure plate for SR20 (unknow brand)
- Flywheel for sr20 (has surface rust, reccomend resurfacing)
- 2 new throwout bearings for sr20
- KA Twin Cam valve cover w/ all spark plug holder clips
- 2 Rear Brake/Turn signal assemblies (driver and pass) | has white paint on them
- 2 Maxima Single piston front calipers & mounting hardware (painted red)
- 2 Maxima front rotors
- 2 Clutch fans w/ clutches
- fan clutch
- 2 T25/T28 5 bolt turbo exhaust outlets
- Stock Radiator =SOLD
- Altima Dual fan w/ wiring =SOLD
- 2 Different fuse covers (one has yellow writing the other white, different sizes)
- Generic Shift Knob
- Set of heater core hoses
- 3 4x114.3 Black Steel rims | 2 w/ tires, (20% tread)
- 2.5" Exhaust w/ T5 Top Speed Pro 1 Muffler
- Custom throttle cable bracket for sr20
- Brake Master Cylinder | Non-ABS
- 2 Turbos
- One is a Garrett T25 right off of my old car, it has back and forth shaft play and burns oil
- The other it a T25/T28 Hybrid turbo with generic covers and Garrett internals that has side by side shaft play
* Both turbos come with the waste gate actuators, oil outlets, and one of them will have the metal air intake elbow.* = Both turbos are sold!
- Brand new exhaust stud for header.
- Brand new turbo outlet gasket
+ I am not sure if the following items are for a KA or for an SR20, you'd have to come check them out for yourself +
- 3 Radiator hose, all different sizes
- Alternator
- Power Steering Pump
If you have any questions, feel free to ask. Sorry, I don't have any pictures because I'm a brokeass mother fucker who can't afford a digital camera. I am located in the St. Pete area.
Thanks!
- Christian V.
Last edited by Teggy_Boy; Jun 11, 2007 at 10:33 AM.
nice boobs
oh yeah... back to cars... are the turbo outlets stock or SS?
oh yeah... back to cars... are the turbo outlets stock or SS?
__________________
Originally Posted by dan
granted, people are allowed to do what they want to their car. if it makes you happy or pleases you, do it. just dont expect the rest of us to care, approve, or suck your dick for doing it.
TR Stock Steering-Wheel Crew
Member #001
Member #001
TR "Old Skool DA" crew
Member #01.8L
Member #01.8L
boo, i need SS autocrap 
also, the alt is easy to tell, the SR has 4 splines on the pulley the KA 5
or was it the other way around? no, i think i'm right
and booby rep was given before i even posted
also, get up a pic of the SR coil cover, it sounds interesting, i might buy it

also, the alt is easy to tell, the SR has 4 splines on the pulley the KA 5
or was it the other way around? no, i think i'm right
and booby rep was given before i even posted
also, get up a pic of the SR coil cover, it sounds interesting, i might buy it
__________________
Originally Posted by dan
granted, people are allowed to do what they want to their car. if it makes you happy or pleases you, do it. just dont expect the rest of us to care, approve, or suck your dick for doing it.
TR Stock Steering-Wheel Crew
Member #001
Member #001
TR "Old Skool DA" crew
Member #01.8L
Member #01.8L
boo, i need SS autocrap 
also, the alt is easy to tell, the SR has 4 splines on the pulley the KA 5
or was it the other way around? no, i think i'm right
and booby rep was given before i even posted
also, get up a pic of the SR coil cover, it sounds interesting, i might buy it

also, the alt is easy to tell, the SR has 4 splines on the pulley the KA 5
or was it the other way around? no, i think i'm right
and booby rep was given before i even posted
also, get up a pic of the SR coil cover, it sounds interesting, i might buy it




