For Sale/WTB Nissan Strictly Nissan related For Sale/WTB

FS:SR20det swap and stuff

Thread Tools
 
Old Mar 20, 2006 | 10:06 AM
  #1 (permalink)  
Kinkozes's Avatar
Thread Starter
El Jefe de KitaIpon
 
Joined: Jan 2001
Posts: 223
Likes: 0
Default FS:SR20det swap and stuff

Everything is on sale as follows, will NOT separate but WILL Bundle. Prices are FIRM, It's the minimum I can take for the parts and I want to sell quick, not make it a forum auction. Thanks.

LAte model Blacktop SR20det swap w/ red valve cover 30k miles, compression tested 160 across the board.
It includes the following:
-Esteban @ Enjuku conversion wire harness with ignitor relocated inside
-ACT 6puck clutch w/less than 100 miles on it + resurface and balanced OEM flywheel
-Brand new clutch slave and clutch line (in the bag)
-used JDM Tomei short shifter
-it also has brand new upgraded spark plugs, comes w/AC compressor and line, PS bracket, no pump, heater hoses. MAf with HKS mushroom intake. $2500



The following has less than 100 miles on it.

Apex N1 3" exhaust (on car less than 100 miles) Like new. With hardware and gaskets like new. $450

Megan Racing 3" downpipe & testpipe $100

Greddy VSPL S13 FMIC kit w/all hardware + Enjuku hotpipe + Greddy Type R BOV welded on cold side $800

Koyo aluminum radiator w/ hoses + 1.2 cap + Altima OEM thin dual electric fans wired up w/relay $325

The following are from a 93 black S13 Convertible SE

Bumper (no support) $50
Fenders $25
hood $25
headlights w/brackets $45
Headlight's wire subharness $15 or take headlights, brackets and subharnesses for $50
Trunk door w/OEM 3rd light spoiler $50

VIN# JN1HS34P6KW016762 rolling stripped out 89 coupe chassis with clean title $250

Brand new on the bag subframe urethane spacers $25

Email kinkozes@hotmail.com

No lowballers, no opinions on prices needed, comments and suggestions please PM, thanks

Mario
__________________

Last edited by Kinkozes; Mar 23, 2006 at 03:25 PM.
Reply
Old Mar 20, 2006 | 12:47 PM
  #2 (permalink)  
Superkaioken's Avatar
Banned
 
Joined: Apr 2005
Posts: 2,068
Likes: 0
Default

400 for apexi N1 exhaust?
Reply
Old Mar 22, 2006 | 11:06 AM
  #3 (permalink)  
coryishot19's Avatar
bored...
 
Joined: Apr 2005
Posts: 994
Likes: 0
Default

Originally Posted by Kinkozes
Everything is on sale as follows, will NOT separate but WILL Bundle. Prices are FIRM, It's the minimum I can take for the parts and I want to sell quick, not make it a forum auction. Thanks.

LAte model Blacktop SR20det swap w/ red valve cover 30k miles, compression tested 160 across the board.
It includes the following:
-Esteban @ Enjuku conversion wire harness with ignitor relocated inside
-ACT 6puck clutch w/less than 100 miles on it + resurface and balanced OEM flywheel
-Brand new clutch slave and clutch line (in the bag)
-used JDM Tomei short shifter
-it also has brand new upgraded spark plugs, comes w/AC compressor and line, PS bracket, no pump, heater hoses. MAf with HKS mushroom intake. $2600



The following has less than 100 miles on it.

Apex N1 3" exhaust (on car less than 100 miles) Like new. With hardware and gaskets like new. $450

Megan Racing 3" downpipe & testpipe $100

Greddy VSPL S13 FMIC kit w/all hardware + Enjuku hotpipe + Greddy Type R BOV welded on cold side $800

Koyo aluminum radiator w/ hoses + 1.2 cap + Altima OEM thin dual electric fans wired up w/relay $325

The following are from a 93 black S13 Convertible SE

Bumper (no support) $50
Fenders $25
hood $25
headlights w/brackets $45
Headlight's wire subharness $15 or take headlights, brackets and subharnesses for $50
Trunk door w/OEM 3rd light spoiler $50

Brand new on the bag subframe urethane spacers $25

Email kinkozes@hotmail.com

No lowballers, no opinions on prices needed, comments and suggestions please PM, thanks

Mario
why is there a redtop valve cover on a black top?
Reply
Old Mar 22, 2006 | 11:26 AM
  #4 (permalink)  
Kinkozes's Avatar
Thread Starter
El Jefe de KitaIpon
 
Joined: Jan 2001
Posts: 223
Likes: 0
Default

Originally Posted by coryishot19
why is there a redtop valve cover on a black top?
Personal preference...
__________________
Reply
Old Mar 22, 2006 | 12:03 PM
  #5 (permalink)  
Anthony R's Avatar
SAL-T
 
Joined: May 2005
Posts: 3,159
Likes: 0
Default

it is a black top right???? or is is it a newer 180sx redtop b/c they also have the fibbs in the front like the balcktop. just askin.
__________________
Matthew "RudeBoy" Nugent 2/03/88-04/01/09
Reply
Old Mar 22, 2006 | 12:06 PM
  #6 (permalink)  
Anthony R's Avatar
SAL-T
 
Joined: May 2005
Posts: 3,159
Likes: 0
Default

how much for just the greddy vspl w/ all hardware?
__________________
Matthew "RudeBoy" Nugent 2/03/88-04/01/09
Reply
Old Mar 22, 2006 | 12:13 PM
  #7 (permalink)  
EludeR's Avatar
Registered User
 
Joined: Dec 2003
Posts: 1,667
Likes: 0
Default

They made redtops with the later 54C parts as well.... (in the later years).
Reply
Old Mar 22, 2006 | 06:42 PM
  #8 (permalink)  
coryishot19's Avatar
bored...
 
Joined: Apr 2005
Posts: 994
Likes: 0
Default

Originally Posted by Kinkozes
Personal preference...

true the red top is much hotter
Reply
Old Mar 22, 2006 | 07:22 PM
  #9 (permalink)  
Clifford's Avatar
weezin the juice
 
Joined: Mar 2004
Posts: 3,341
Likes: 0
Default

Willing ot part out the Short shifter? if so let me know. I can swap my OEM one.

Also any suspension components?
__________________
Reply
Old Mar 23, 2006 | 03:15 PM
  #10 (permalink)  
Kinkozes's Avatar
Thread Starter
El Jefe de KitaIpon
 
Joined: Jan 2001
Posts: 223
Likes: 0
Default

Originally Posted by Anthony R
it is a black top right???? or is is it a newer 180sx redtop b/c they also have the fibbs in the front like the balcktop. just askin.

yes it is a blacktop kouki 180sx motor, just swapped the valve cover.
__________________
Reply



All times are GMT -8. The time now is 07:31 PM.