2000 Ls Block and 98 Gsr head
Thread Starter
Fail
Joined: Jan 2005
Posts: 651
Likes: 0
2000 Ls Block and 98 Gsr head
LS Block
All machine work on block was done at Brocks Machine Shop in Tarpon Springs the block was Bored .20 over and Honed. The crank was {Polished crank, Honda Bearings, MagnaFluxed, the block originally had 20000 miles and was out of a 2000 Acura Integra LS. Have all NEW gaskets belts and parts to complete short block. The block is immaculate. 850 Obo
Gsr Head
Fresh out of the machine shop Magnafluxed, resurfaced, Valve Job, Fully Rebuilt out of a 98 gsr. I have complete Gsr Topend including Cams, distributor, Intake, Valve Cover, Vtec solinoid Asking 800 for all.. just head for 600
Have pics of all cant upload due to size.. Will email pics if needed. Contact Larry At TwinCam Performance 727-934-7033 for more info.
Also parting out running complete 1991 5-speed Ls Integra 4 Door
All machine work on block was done at Brocks Machine Shop in Tarpon Springs the block was Bored .20 over and Honed. The crank was {Polished crank, Honda Bearings, MagnaFluxed, the block originally had 20000 miles and was out of a 2000 Acura Integra LS. Have all NEW gaskets belts and parts to complete short block. The block is immaculate. 850 Obo
Gsr Head
Fresh out of the machine shop Magnafluxed, resurfaced, Valve Job, Fully Rebuilt out of a 98 gsr. I have complete Gsr Topend including Cams, distributor, Intake, Valve Cover, Vtec solinoid Asking 800 for all.. just head for 600
Have pics of all cant upload due to size.. Will email pics if needed. Contact Larry At TwinCam Performance 727-934-7033 for more info.
Also parting out running complete 1991 5-speed Ls Integra 4 Door
engine building &amp;amp;best
Joined: May 2003
Posts: 11,971
Likes: 0
the best and easiest picture size converter http://www.safesite.com/product.down...SiteID=digibuy
__________________
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
Thread Starter
Fail
Joined: Jan 2005
Posts: 651
Likes: 0
Thread Starter
Fail
Joined: Jan 2005
Posts: 651
Likes: 0
Also Here is the link to ebay where the head is being sold. I will end item early if someone wants to purchase. but ebay has the pics. GSR Head
