FS: CRX Shell with built lsvtec parts
Thread Starter
Registered User
Joined: Sep 2003
Posts: 69
Likes: 0
FS: CRX Shell with built lsvtec parts
I have a 88 CRX Si shell that is in pretty good condition. It used to had a b16 in it but my friend took it out. The mount has been rewelded to support b-series engine. I have all wire harness, ecu, shift linkage and axles plus full disc brake conversion.
I also have a separate lsvtec bottem end. It's a ls block with knife edged gsr crank and rods with ctr pistons, vtec oil pump and arp rod bolts. Block has dow pin hole for vtec head and extenal oil line for vtec solenoid. Right now the engine is mated to the LS tranny with fidanza flywheel, clutch master stage 4 and race pulley.
I also have a bare gsr head with 3 angle valve jobs and port job but I'm gonna keep it for now, might sell it later if I have sold everything else. I have brand new rocket valves, valve springs and omiman's stage 2 cams. Also have a used adjustable cam gears and used ls distributor.
Let me know what you are intersted in and I'll let you know a price. I can sell part by part or everything here together. Either leave a PM or email me at fox297@excite.com. I am in Gainesville, but I have AAA that can tow up to 100 miles.
I also have a separate lsvtec bottem end. It's a ls block with knife edged gsr crank and rods with ctr pistons, vtec oil pump and arp rod bolts. Block has dow pin hole for vtec head and extenal oil line for vtec solenoid. Right now the engine is mated to the LS tranny with fidanza flywheel, clutch master stage 4 and race pulley.
I also have a bare gsr head with 3 angle valve jobs and port job but I'm gonna keep it for now, might sell it later if I have sold everything else. I have brand new rocket valves, valve springs and omiman's stage 2 cams. Also have a used adjustable cam gears and used ls distributor.
Let me know what you are intersted in and I'll let you know a price. I can sell part by part or everything here together. Either leave a PM or email me at fox297@excite.com. I am in Gainesville, but I have AAA that can tow up to 100 miles.
Last edited by Fox297; Jun 1, 2005 at 01:28 PM.
pass the dutch
Joined: Nov 2004
Posts: 1,363
Likes: 0
how much for the shell ?
__________________
shared_pm me for great prices on hydro and organic garden setups aswell as all the goods you need to grow cheaper than the big guys. built for youre needs. save money on fruits and vegetables. i dont sell any illegal products goods or services just fully ready to grow closets and rooms.
shared_pm me for great prices on hydro and organic garden setups aswell as all the goods you need to grow cheaper than the big guys. built for youre needs. save money on fruits and vegetables. i dont sell any illegal products goods or services just fully ready to grow closets and rooms.
Thread Starter
Registered User
Joined: Sep 2003
Posts: 69
Likes: 0
I'll take $500 for the shell and wire harness. Shell has both stock and new Z fenders that's not painted yet. I'll try to take some pics, but it'll be a while since I don't have a camera.
I don't want any trade, I need cash to pay for my new R1. Just let me know what you want. For the cams, it's $500, it's brand new. I'll include the adjustable cam gears for $50 if you buy the cams. Not sure what brand it is but it's very similar to June cam, it use stock outer rings with billet aluminum inner piece.
I don't want any trade, I need cash to pay for my new R1. Just let me know what you want. For the cams, it's $500, it's brand new. I'll include the adjustable cam gears for $50 if you buy the cams. Not sure what brand it is but it's very similar to June cam, it use stock outer rings with billet aluminum inner piece.
Registered User
Joined: Jul 2005
Posts: 100
Likes: 0
the names mike im very interested in the rex shell i just came from new york and i brought my motor from my teg that i wrecked its a b18c5 and it needs the company of a rex let me know www.lengua99@hotmail.com
