Anyone have a press in Tampa
September - Ride of the Month
Thread Starter
Join Date: Jul 2000
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
Anyone have a press in Tampa
I need to remove and insert new poly bushing into upper control arms.
__________________
Photo Retouching | Graphic Design | Corporate Branding
September - Ride of the Month
Thread Starter
Join Date: Jul 2000
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the general comment, I was look for someone on here that had one so I would have to goto someone unknown. I rather spend the number on a TR member.
__________________
Photo Retouching | Graphic Design | Corporate Branding
Cecil in Bike Tech has many superhuman powers. Chuck Norris is afraid of Cecil. He has the ability to look at things and they do what he is thinking!
^ True Story.
__________________
Originally Posted by JustMiata
It's like this: The toadstool juice fires through the unicorn injector into the fairy dust chamber, where the tiny wizard does his secret work...Then a gang of keebler elves get hopped up on the crystalline byproduct of the wizard's tinkering, (they smoke it) and then the elves push the spinning triangle through a series of dimensional portals to a final realm codenamed the "exhaust port..." At least that's my undersanding of rotary sorcery...
Where are you at? I'm up in Odessa (near 54 and Gunn Hwy) and have a press.
i put it in there just in case you need it, or maybe it might help someone else in the future (for searches). Napa for example, only charges 7 bucks a bushing, so if you have one with a machine shop close by, might be an option if all else fails. Good luck.
September - Ride of the Month
Thread Starter
Join Date: Jul 2000
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
I'm guessing Napa will be my best chose, thanks !
__________________
Photo Retouching | Graphic Design | Corporate Branding