quietflight6787

ok question 1. would an f20b sir motor have them same engine mounts as the single cam f22 that is stock in the cb7?
2. are the h-series and f-series mounts the same?
3.has any one done either of these swaps in their cb7 that would like to tell me how complicated the process was and what not?

jlude90

1 should be yes
2 yes
3 yes

i'm not sure about how complicated it is though

quietflight6787

awesome so if i went H-series i wouldnt have to buy the mounts... and what about like the tranny mounts? are they the same as well?

would you recomend H22 or f20?

DemonCivic

h and f series are interchangeable, very simple swap

quietflight6787

thanks for info guys, i went on cb7tuner.com and found an awesome sticky for these swaps, looks pretty easy

slizzle

1. i think so
2. yes
3. sadly no

slizzle

yea like stated before the f&h series are interchangeable but i would not reusing the stock f mounts there weak

Jspec94LUDE

i would go with f20b much more durable motor and revs higher mine will actually be delivered tommorow

slizzle

how much power can a f20b make and i dont feel like lookin for that answer and how high can they rev? and would H22 cams fit and work in the f20b ? i need those questions answerd

PooN_Lude

I'd anwser, but I'd just be encouraging your lazieness.

google.com, Honda-tech.com


You'll feel more accomplished when you find the anwsers for yourself. You'll be a better person for it. Trust me.