Where can I get a 2.5" exhaust donut gasket??
Hide your daughters
Thread Starter
Join Date: Mar 2005
Posts: 1,443
Likes: 0
Received 0 Likes
on
0 Posts
Where can I get a 2.5" exhaust donut gasket??
Tried NAPA, Advance, and AutoZone, no one has one big enough for my JDM ITR header and cat. I need the one that goes between the two.
Any ideas?? Thanks.
Any ideas?? Thanks.
Honda/Acura
Honda = s2000
Acura = itr
Honda = s2000
Acura = itr
__________________
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
I just did mine last friday. I took my EG to DrivenConcepts and bought that donut/adapter for $50 bux. Then they charged me $40 bux to weld it to my exhaust pipe so they could fit the ITR collector into it and bolt the collecter up to the new flange.
Last edited by Liquid; 10-13-2007 at 02:55 PM.
Hide your daughters
Thread Starter
Join Date: Mar 2005
Posts: 1,443
Likes: 0
Received 0 Likes
on
0 Posts
Oh wow, I ended up getting a free 2.5" donut gasket from an exhaust shop (and they threw in some spring-bolts).
And I used a JDM ITR cat and everything bolted right up.
And I used a JDM ITR cat and everything bolted right up.
cot damn it, SOB!!
something told me I should have waited and checked some other places.
At first some kid at DC was telling me I need to cut the end off my ITR header!!!!!
lol. crazy kid!
I have custom 2.5" straight piping for my exhaust and the kid wanted to tell me I should cut the end off my header and the end off my piping and use a flex pipe and two flanges welded to the ends to make it work because apparently he didnt know about this bolt on donut application!
THERES NO WAY IN HELL I WAS CUTTING UP MY ITR HEADER!!!
something told me I should have waited and checked some other places.
At first some kid at DC was telling me I need to cut the end off my ITR header!!!!!
lol. crazy kid!
I have custom 2.5" straight piping for my exhaust and the kid wanted to tell me I should cut the end off my header and the end off my piping and use a flex pipe and two flanges welded to the ends to make it work because apparently he didnt know about this bolt on donut application!
THERES NO WAY IN HELL I WAS CUTTING UP MY ITR HEADER!!!
Last edited by Liquid; 10-13-2007 at 04:28 PM.