Kia sephia Window Crank
King of Ricers
Thread Starter
Join Date: May 2005
Posts: 11,330
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TJElite
That tool is not as easy to find as it used to be, and, imo, is not so great. its not all that easy to use, and can muck up the crank, the shaft, and / or the door panel.
Use a pick, needle nose, or take a flat screwdriver and bend the end 1/8" to 90 ish degress.
Toby
Use a pick, needle nose, or take a flat screwdriver and bend the end 1/8" to 90 ish degress.
Toby
so happy.
Registered User
Join Date: Apr 2005
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
King of Ricers
Thread Starter
Join Date: May 2005
Posts: 11,330
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TJElite
"A" Box? Like only one? Can you do that?
Toby
Toby
isuck
Join Date: May 2010
Posts: 491
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mbanks21
Whats a window crank?
I miss those buggers
__________________
LOGIC? You seriously want to invoke logic in a conversation about fake hijackings, missiles hitting the pentagon, and bombs planted throughout the world trade center? I thought it was a given that logic was checked at the door when entering one of these threads.
King of Ricers
Thread Starter
Join Date: May 2005
Posts: 11,330
Likes: 0
Received 0 Likes
on
0 Posts
Thanks to good advice from John & Toby I figured out how to get the clip off - After I got it off I was like oooh ok now I get it.
Unfortunately he bought5 1/4" speakers instead of the needed 6 1/2" so I had to cut panels but they turned out very clean - the outer rim of the speaker basket sat flush with the OEM mounting hole. The midbass was nonexistant though so the w0s will have to carry the slack.
I am concerned a little about water swelling the paneling but for $30 I think he got a deal anyways. Note the quality soldering
Unfortunately he bought5 1/4" speakers instead of the needed 6 1/2" so I had to cut panels but they turned out very clean - the outer rim of the speaker basket sat flush with the OEM mounting hole. The midbass was nonexistant though so the w0s will have to carry the slack.
I am concerned a little about water swelling the paneling but for $30 I think he got a deal anyways. Note the quality soldering
