Engine Cleaning (hot tank)
clean it with simple green, pressure wash it, then some degreaser and a wire brush to get the rest... then finish it all of with a few cans of carb cleaner
Or just spray'er down with aircraft remover, then pressure wash
Or just spray'er down with aircraft remover, then pressure wash
__________________
www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
lol its not for show but im crazy about having a clean car ...but i figured that since it was out and i was building it up, i might as well make it look sexy, the paint sound like a good idea i just want it to look like its new.
__________________
Alarm Crazy!
|| 1994 Honda del Sol vtec || B16a2 || 2 engines in garage one in car w00t status ||
-John
Aim: le lead
Cell: (813)843-8523
Alarm Crazy!
|| 1994 Honda del Sol vtec || B16a2 || 2 engines in garage one in car w00t status ||
-John
Aim: le lead
Cell: (813)843-8523
Originally Posted by InsaneCivicSedan
clean it with simple green, pressure wash it, then some degreaser and a wire brush to get the rest... then finish it all of with a few cans of carb cleaner
Or just spray'er down with aircraft remover, then pressure wash
Or just spray'er down with aircraft remover, then pressure wash
that is what i did to get it to where it is at now but i used brake cleaner rather than carb cleaner.... same thing though
__________________
Alarm Crazy!
|| 1994 Honda del Sol vtec || B16a2 || 2 engines in garage one in car w00t status ||
-John
Aim: le lead
Cell: (813)843-8523
Alarm Crazy!
|| 1994 Honda del Sol vtec || B16a2 || 2 engines in garage one in car w00t status ||
-John
Aim: le lead
Cell: (813)843-8523
Originally Posted by InsaneCivicSedan
clean it with simple green, pressure wash it, then some degreaser and a wire brush to get the rest... then finish it all of with a few cans of carb cleaner
Or just spray'er down with aircraft remover, then pressure wash
Or just spray'er down with aircraft remover, then pressure wash
Fichtner Automotive
They have done alot of work for me.
http://www.siliconbay.org/dg.lts/id....mpany_view.htm
They have done alot of work for me.
http://www.siliconbay.org/dg.lts/id....mpany_view.htm
Originally Posted by SloCxHatch
lay off him dude he just wants to put a clean set up in his car and i dont blame him for wanting a clean engine bay.....
btw right back at ya
__________________
Shut yo ass up nugguh..
ReginaVagina
Shut yo ass up nugguh..
ReginaVagina
Lol no need to bash, you may find that sarcasm is rather difficult to detect via the internet, and +1 for matt sticking up for me...and everyone else
EDIT: as for info on the future set up i plan to use eagle rods and cp pistons, unless i come across on a deal for pistons, then i will use some sparks racing rods and whatever good deal i find on pistons (then throw that block in till i blow it up and build up my other block that i'll have left over with expensive stuff, it's 800 for eagle and cp and if i get a deal its 225 for the spark's rods and 250ish for good deal on pistons. i saw a set of srp's selling on ht but chris looks like he is after them and they don't have pins so i don't see it as a good deal.
anyway the current planned set up is a bult bottom end with those parts, ....and everything else i have, just about...
set up will include precision sc50 .48/.60 stage 3 wheel 360 degree bearings, a tnt/drag looking manifold (first item i bought, will prob switch to blox later on) a deltagate (taking the chance, will switch to tial if it creeps) johnnyrace car fmic, rc 440 injectors (thanks to mike) 255 holly fuel pump (thanks to john) um... uberdata soon to be thanks to kj (as soon as i stop being lazy)and dave and of course blake....um.. act extreme pressure plate, lightly reworked head, full ic pipe kit from spoolin performance...and kteller exhaust 3" with magniflow muffler (mild not stainless) my goals are still 250 whp which im positive i'll make with ease....then i want to learn to tune, so i plan on buying a eprom burner and paying very close attention to dave ...oh yeah s80 lsd tranny is on the boat on its way here and that should about cover it...im sure i missed a few things...anyway once i learn to tune i'll turn up the boost a little bit and make around 280ish and keep it nice and safe...until the bug hits me and i blow it.
EDIT: as for info on the future set up i plan to use eagle rods and cp pistons, unless i come across on a deal for pistons, then i will use some sparks racing rods and whatever good deal i find on pistons (then throw that block in till i blow it up and build up my other block that i'll have left over with expensive stuff, it's 800 for eagle and cp and if i get a deal its 225 for the spark's rods and 250ish for good deal on pistons. i saw a set of srp's selling on ht but chris looks like he is after them and they don't have pins so i don't see it as a good deal.
anyway the current planned set up is a bult bottom end with those parts, ....and everything else i have, just about...
set up will include precision sc50 .48/.60 stage 3 wheel 360 degree bearings, a tnt/drag looking manifold (first item i bought, will prob switch to blox later on) a deltagate (taking the chance, will switch to tial if it creeps) johnnyrace car fmic, rc 440 injectors (thanks to mike) 255 holly fuel pump (thanks to john) um... uberdata soon to be thanks to kj (as soon as i stop being lazy)and dave and of course blake....um.. act extreme pressure plate, lightly reworked head, full ic pipe kit from spoolin performance...and kteller exhaust 3" with magniflow muffler (mild not stainless) my goals are still 250 whp which im positive i'll make with ease....then i want to learn to tune, so i plan on buying a eprom burner and paying very close attention to dave ...oh yeah s80 lsd tranny is on the boat on its way here and that should about cover it...im sure i missed a few things...anyway once i learn to tune i'll turn up the boost a little bit and make around 280ish and keep it nice and safe...until the bug hits me and i blow it.
__________________
Alarm Crazy!
|| 1994 Honda del Sol vtec || B16a2 || 2 engines in garage one in car w00t status ||
-John
Aim: le lead
Cell: (813)843-8523
Alarm Crazy!
|| 1994 Honda del Sol vtec || B16a2 || 2 engines in garage one in car w00t status ||
-John
Aim: le lead
Cell: (813)843-8523
Last edited by lead; 02-21-2005 at 05:45 PM.
i use mother aluminum wheel cleaner / pressure washer...
u can see the block little in this pic and the head ... it was so clean it looked like silver paint..
u can see the block little in this pic and the head ... it was so clean it looked like silver paint..
__________________
RIP Kevin Gonzales AKA Slo_Si 9/06
RIP Robert Kolp aka 00ek 4/07
RIP Pablo Garcia aka FatHead 9/07
_Jake D
RIP Kevin Gonzales AKA Slo_Si 9/06
RIP Robert Kolp aka 00ek 4/07
RIP Pablo Garcia aka FatHead 9/07
_Jake D