Josh

what are the symptoms? initially i was thinking i bent some valves because i'm hearing a lot fo valve noise, but now i'm not so sure. my car doesn't sputter, no funky idle, still pulls like it did before, no smoke, no funny smells, so wtf could it be if not fuxored valves??

CamaroJoe

Symptoms of bent valves = Your car doesn't run

Sounds like lifter noise. Check your oil level. If it's low, add oil.

There are other possibilities such as clogged lifter ports or improper valve lash. Try the oil first and if thats not it take it to a mechanic, cause you probably can't fix the other things yourself.

Josh

oil is fine, who does reputable work like this? and is it ok to drive on for a couple of weeks till i get it fixed, as long as i take it easy?

CamaroJoe

It all depends on what is causing the noise. I have driven a vehicle that had lifter noise for over 6 months without a problem. Please elaborate on what the noise sounds like. Does it get louder at high RPMs or stay the same(or get softer)? etc.

1slowaguila

Your car will usually miss and run rich.Only sure way i say to check for bent valves is a compression test.

Josh

well it sounds like a clicking noisem and gets faster as the rpms get higher, doesn't get louder or softer.

99B16Si

a lot depends on how badly bent they are...
are u sure your valves just dont need to be adjusted?

if they are bent your valve lash is going to be pretty far off also. a leakdown test will tell u for sure if any are bent and which ones if any

Josh

thanks all, i appreciate all the help!!! keep it coming. thanks!!!!!

InsaneCivicCoupe

just like dave said, run a leak down test, and make sure all the cylinders are as close to the same as possible, and take your car somewhere for a valve adjustment..... Collin usually charges like 40 or 50 bucks for non vtec valve adjustments.......

InsaneCivicCoupe

just like dave said, run a leak down test, and make sure all the cylinders are as close to the same as possible, and take your car somewhere for a valve adjustment..... Collin usually charges like 40 or 50 bucks for non vtec valve adjustments.......