Oil catch can question?
what you can do is go to HOME DEPOT, and get some 2.5 inch pvc tubing(or larger) cut about 10inch section. then they have rounded caps you can use ovc glue to use as ends. but before you glue em on, you need to go to the plumbing section and get your correct size hose barbs and locking nuts. you can fill this tube with steel wool to catch and seperate oil for extra assurance. drill the holes, insert fittings, use some JB weld, or silicone behind them, to make sure they seal. and youre done, you can also paint it if you want to be creative.
this worked on my alcohol powered go kart for years
this worked on my alcohol powered go kart for years
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
this is the catchcan i run in my car, it comes with extra fittings to run off the back of a b-series honda block, and it also comes with a rubber gromet and pcv valve incase u want to re-route the vapors back into the intake for emission purposes. its made by ENDYN
I dump mine to the ground. Emptying some container would probably require the removal of my UICP and maybe my battery and tray.
__________________
You may know who we are, but we KNOW who you are.
You may know who we are, but we KNOW who you are.
Originally posted by Billy
Karl, are you making a mess now? If not don't worry about it and save your money.
Karl, are you making a mess now? If not don't worry about it and save your money.
Im making a HUGE mess.. see:
http://community.webshots.com/photo/...91603833OAyZkP
http://community.webshots.com/photo/...91603876bWzmMx
I found an awesome can. Its made by Accurate Machine Works. It has a baffle and the sides have undercuts so the oil cant climb the walls. Itll be here tomorrow and Ill snap some pics of it