st pete chad

ok so im selling the 95 GT roller and building this cobra.its a 94 cobra 81,000 # 400 of 5009..here is a list of the build im sure im missing alot of stuff but this is what i can think of right now.also still need to paint the hood put the lights in.put the aluminum battery box in the back.


ENGINE

351w roller block
Edelbrock victor jr heads
F 303 cam
1.7 roller rockers
Polised spyder intake upper,lower
75mm accufab throttle body
3"pmas blow through mass air
Sheet metal valve covers
Polished catch can
Ford racing harmonic balancer SFI
DSS main support

TURBO SETUP

Turbonetics 76mm turbo bb oil/water cooled
JGS 50mm wastegame
JGS 50mm blow off valve
All polished hot & cold piping
DEI turbo blanket
DEI header wrap

SUSPENTION

AJE k member
AJE front tubular A arms
Maximum motorsports caster camber plates
AJE front coilovers
AJE rear coilovers
Maximum motorsport subframe connectors
Flaming River FR 1892 manual rack& pinion

BRAKES

pro street AeroSpace brakes

• Billet Aluminum 4 Piston Calipers
• Billet Aluminum Hubs with screw in dust caps
• Billet Aluminum Mounting Brackets
• 11 3/4 Diameter .81 Thick Vented Rotors
• Grade 8 Hardware
• 1/2 x 3" long screw in wheel studs
• Wheel Bearings
• Grease seals
• Hawk Performance Brake Pads
• Meets All NHRA / IHRA Requirements

Moser 31 spline axles
Hardened wheel studs
McGard lug nuts
Line lock


transmission

ART CARR C-4 SFI package
ART CARR SFI bellhousing
ART CARR 3500 stall
B&M Pro stick
B&M Tranny Cooler braided lines
Aluminum Driveshaft
Driveshaft safety loop


Fuel System

Aeromotive Fuel System
Aeromotive Fuel Rails
A 1000 Pump
Aeromotive Fuel Pressure regulator
Aeromotive Y Block
All braided lines
Lucas 75lb injectors EV1 Style


ELECTRONICS

Anderson PMS Series 4 with 3 Bar map sensor
MSD 8451 Pro Billet distributor
MSD Digital-6 plus CD ignition
MSD plus wires
MAD Cap/rotor/coil
AEM tru boost controller
Autometer Wideband

COOLING

Meziere water pump 55GPM
Fluidyne radiator
Pro billet thermostat Housing
Electric fan


WHEELS/TIRES

3pc Trak Star Pro series
15x10 15x4
325/60/15 BF Goodrich Drag Radials


BODY

5" Harwood Cobra R hood
clear Cobra lights
Cobra Front/Rear Bumper

shinysideup

Awesome start Super Snake

harold harper

Looking good .I will get by and see it in person soon.

st pete chad

sounds good...looks alot better in person i need to wash it all the way.i just got mall the dust and dirt off it so i could take a few pics.in person its still dirty

st pete chad

should be up and running soon.just need to finish a few things.

SpankReasY

Take some videos too lol! Sweet ride. I miss my 94 cobra .

Reminds me of Codys cobra too

st pete chad

thanks man

oh trust me ill have some videos.i was going to keep building my 95GT but i could not pass up this car.the brakes and wheels alone were worth what i paid for the car

st pete chad

here are a few more pics i took with my cell phone today

st pete chad

got the motor in the car with the victor jr heads the turbo headers fit alot better with the victor jr heads over the trick flow just need to get the crossover pipe setup need to extened it for a 351w.should have the car up and running by the end of the month

herrcomestrouble

good lookin ride... why swap the tails tho? Horizontal tails FTMFW!