273whp All Motor S2000
I've tuned a lot of cars in the past months but have not had time to post them :( I'm trying to get back into the loop of posting :lol: Anyways!
The dyno software crashed when we plugged a thumb drive in. So the last few dyno sheets were not saved. The owner's friend took a picture of the screen right before it happened. I'm trying to get the picture from him. Run down of the setup below 273whp on 93 octane pump gas on Land and Sea dyno * Prosport water temp, oil temp and oil pressure gauges * AEM wideband * AEM EMS tuned by Alpha :D * 750cc RC injectors * Koyo radiator w/Koyo cap and Samco hoses * Mugen thermostat * Hondata intake gasket * Very lite port work on head * Titanium retainers, KMS valves w/dual valvesprings and OEM valve seats * APR head studs * Stock cams (cryo’d by S&R and micropolished) * Stock intake manifold * Stock exaust manifold / header * Custom CP pistons (compression 13.2:1 estimated, X-forging) * InlinePro rods (Forged H-beam billet 4340 steel) w/.905 wristpins * InlinePro billit crank (106mm) straight through oil design with large race radiuses and fully counterweighted * InlinePro head gasket (Cometic brand) * AEBS mid-sleeves * Stock oil pump * Stock Honda main and rod bearings * Prosport oil sandwich plate * EGR block off plate * Walbro fuel pump * ACT HD pressure plate, ACT 6 puck unsprung disc, Fidanza 8lb flywheel * Modified stock airbox w/K&N filter * Megan testpipe * HKS Highpower dual (big restriction) http://www.inductionperformance.com/...rokers2k/1.jpg http://www.inductionperformance.com/...rokers2k/2.jpg http://www.inductionperformance.com/...rokers2k/3.jpg |
goodshit alpha but it still na ;)
|
well, hell has officially frozen over!!!! Alpha tuning n/a cars :lol:
All jokes aside, very nice work alpha. Get some cams, well built header, and intake mani. and that thing could break 300whp. |
hahahaha. Funny replies. But thanks!
With a good header, intake manifold, cams and better exhaust it will break 300whp. If the owner can do that or not right now I dont know :( |
Nice!
|
Sick
|
dam that sick...i wanna see some numbers with itb's,full exhaust ,a nice set of cams & a tune on this thing
|
Please , buy cams because with a 106 crank if your not making 300whp you need jesus haha
But good shit for stock cams |
Originally Posted by Jap
(Post 6575217)
Please , buy cams because with a 106 crank if your not making 300whp you need jesus haha
But good shit for stock cams |
All times are GMT -8. The time now is 03:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands