Presidential Detailed: 2004 Honda S2000 BRAKE DUST NIGHTMARE!!
aka The Twanksta!
Thread Starter
Join Date: Oct 2004
Posts: 3,790
Likes: 0
Received 0 Likes
on
0 Posts
Presidential Detailed: 2004 Honda S2000 BRAKE DUST NIGHTMARE!!
This car sees extensive track time, and unfortunately had a bad set of brake pads. The brake pads dusted insanely and instantly attached to anything and EVERYTHING! It ruined a set of brand new BBS wheels, and attached to every crevice on the car! This happened over a year ago, the owner said he clayed the car about a year ago(when this happened) and got most of it off, but trust me the car was nearly brown when I began working on it! haha! I had to clay this car extensively EVERYWHERE, including the door jambs and inside all the body lines and cracks in the body panels. Well lets begin!
Products:
BEFORE:
Products:
BEFORE:
__________________
aka The Twanksta!
Thread Starter
Join Date: Oct 2004
Posts: 3,790
Likes: 0
Received 0 Likes
on
0 Posts
Here you can see the ghosting from a number used for racing.
These are not the wheels that were ruined, but had their fair share of brake dust also as they are now the track wheels.
The worst part of the car was the rear bumper, it was melted during a session at Roebling Road somehow. Along with that, it had a brown substance ALL OVER the exhaust openings. It actually took some APC and a clay bar to remove.
These are not the wheels that were ruined, but had their fair share of brake dust also as they are now the track wheels.
The worst part of the car was the rear bumper, it was melted during a session at Roebling Road somehow. Along with that, it had a brown substance ALL OVER the exhaust openings. It actually took some APC and a clay bar to remove.
__________________
aka The Twanksta!
Thread Starter
Join Date: Oct 2004
Posts: 3,790
Likes: 0
Received 0 Likes
on
0 Posts
Oh, did I mention brake dust???
After only a 1x1 section on the hood.
The exhaust openings I mentioned before..
Every jamb and crack was covered in this same substance..which will be removed.
After only a 1x1 section on the hood.
The exhaust openings I mentioned before..
Every jamb and crack was covered in this same substance..which will be removed.
__________________
aka The Twanksta!
Thread Starter
Join Date: Oct 2004
Posts: 3,790
Likes: 0
Received 0 Likes
on
0 Posts
After a throrough cleaning, back in the garage.
The engine bay was also degreased and dressed.
Before:
After:
Before:
After:
Before:
After:
The headlights were also touched up..
Before:
After:
The engine bay was also degreased and dressed.
Before:
After:
Before:
After:
Before:
After:
The headlights were also touched up..
Before:
After:
__________________
Last edited by Presidential_Detail; 02-03-2009 at 06:57 PM.
aka The Twanksta!
Thread Starter
Join Date: Oct 2004
Posts: 3,790
Likes: 0
Received 0 Likes
on
0 Posts
The exhaust openings came out nicely..
After SIP/White..
We now have a silver car again!!!
Ahh, yes. Thats how the rear end should look!
After SIP/White..
We now have a silver car again!!!
Ahh, yes. Thats how the rear end should look!
__________________
Last edited by Presidential_Detail; 02-03-2009 at 07:01 PM.
aka The Twanksta!
Thread Starter
Join Date: Oct 2004
Posts: 3,790
Likes: 0
Received 0 Likes
on
0 Posts
After SIP/White, even after extensive cleaning for an entire day the paint was still very contaminated.
On the left is after polishing the car, on the right is how the pad looked when I started(new).
After SIP/White, 3m UF, Opti-Seal and two coats of Dodo Juice Supernatural.
On the left is after polishing the car, on the right is how the pad looked when I started(new).
After SIP/White, 3m UF, Opti-Seal and two coats of Dodo Juice Supernatural.
__________________
Last edited by Presidential_Detail; 02-03-2009 at 07:07 PM.
aka The Twanksta!
Thread Starter
Join Date: Oct 2004
Posts: 3,790
Likes: 0
Received 0 Likes
on
0 Posts
The next day we got a little bit of light after a couple rainy days..
The best I could do in the sun..
__________________
Last edited by Presidential_Detail; 02-03-2009 at 07:05 PM.
aka The Twanksta!
Thread Starter
Join Date: Oct 2004
Posts: 3,790
Likes: 0
Received 0 Likes
on
0 Posts
Door Jambs after Megs APC combined with a clay bar. Ive never seen clay melt so fast! haha!
Also took care of the interior on this one..
BEFORE:
Very dusty..
Also took care of the interior on this one..
BEFORE:
Very dusty..
__________________
Last edited by Presidential_Detail; 02-03-2009 at 07:10 PM.
aka The Twanksta!
Thread Starter
Join Date: Oct 2004
Posts: 3,790
Likes: 0
Received 0 Likes
on
0 Posts
Interior Completed.
After completing the car, I took some more photos and then went for a quick photoshoot around town with the owner.
After completing the car, I took some more photos and then went for a quick photoshoot around town with the owner.
__________________
Last edited by Presidential_Detail; 02-03-2009 at 07:13 PM.
aka The Twanksta!
Thread Starter
Join Date: Oct 2004
Posts: 3,790
Likes: 0
Received 0 Likes
on
0 Posts
FINAL SHOTS.
I managed to get a few more sun shots at another location..
I managed to get a few more sun shots at another location..
__________________
Last edited by Presidential_Detail; 02-03-2009 at 07:15 PM.