Any local Fender Rolling??

njwolfturbo · 04-16-2008, 11:13 AM

Need to find a shop or a person who does fender rolling. Want to run some wider rims and need the front fenders inner lip rolled to clear the tires. Im located in Spring Hill but anywhere around Tampa works for me. Thanks

kumar. · 04-23-2008, 02:00 PM

XAT Racing rolls fenders.

KAILUAZ · 04-23-2008, 04:00 PM

This guy comes to Tampa a lot, hit him up.
http://www.tamparacing.com/forums/fo...rlando-fl.html

tbtstud17 · 04-23-2008, 11:17 PM

Quote:

Originally Posted by KAILUAZ

This guy comes to Tampa a lot, hit him up.
http://www.tamparacing.com/forums/fo...rlando-fl.html

thanks kailuaz!!!

check that thread out and if you're interested, hit me up. i also will roll them for you for a little extra =) Mark

hombredelassrtas · 04-24-2008, 12:49 AM

hmmm, if we dont grind mine out i'll have to hit you up

kerpal · 04-24-2008, 02:25 AM

Quote:

Originally Posted by njwolfturbo

Need to find a shop or a person who does fender rolling. Want to run some wider rims and need the front fenders inner lip truck part rolled to clear the tires. Im located in Spring Hill but anywhere around Tampa works for me. Thanks

Try Rota.. Though, I don't know if Rota does such a thing...

tbtstud17 · 07-30-2008, 01:09 PM

still need your fenders rolled?

Integra21 · 07-30-2008, 05:17 PM

importguy1208 on the board does fender rolling and will prob do mine once my enkei's come in.

he does good work. he worked on my buddies jdm dc2

Dntrmmbr · 08-05-2008, 10:08 PM

do it your self with a pipe and drive while having some one hold in place with presure.

hombredelassrtas · 08-06-2008, 05:08 PM

i plan to just cut that part out. get better clearence then rolling and less chance of bending the fender. these cheap jap cars will crush like a tin can if its done wrong

kumar. · 08-08-2008, 02:32 AM

I rolled my friends fenders on his xb, and they came out perfect. though I used the eastwood fender roller. works like a charm with a heat gun.

importguy1208 · 08-08-2008, 03:03 AM

Quote:

Originally Posted by hombredelassrtas

i plan to just cut that part out. get better clearence then rolling and less chance of bending the fender. these cheap jap cars will crush like a tin can if its done wrong

We have a fender roller at the shop and Branden has a good deal of experience with both rolling and pulling if you ever decide to actually get it done. We could probably fix those fenders of yours at the same time too!

FrodoGT · 08-08-2008, 03:04 AM

I have the upgraded eastwood roller in my garage. Rolled my fenders with it.

importguy1208 · 08-08-2008, 03:07 AM

Quote:

Originally Posted by FrodoGT

I have the upgraded eastwood roller in my garage. Rolled my fenders with it.

Yep that's what we have. It works great as long as you take your time and use a heat gun.

hombredelassrtas · 08-11-2008, 12:39 AM

aaron i plan to go carbon which we will have to cut. i am waiting to figure out if i am doing a different bodykit as i'd rather just leave the car with you a week or so and get it all done at once. in the next month or so i should have deffinite plans we can discuss.

04-16-2008, 11:13 AM	#1 (permalink)
njwolfturbo CoolWater VW Club!!! Car: My TRGarage : 40707519	Any local Fender Rolling?? Need to find a shop or a person who does fender rolling. Want to run some wider rims and need the front fenders inner lip rolled to clear the tires. Im located in Spring Hill but anywhere around Tampa works for me. Thanks

04-23-2008, 02:00 PM	#2 (permalink)
kumar. Where is Harold? Car: Slow & Low. My TRGarage New Tampa : 2147483647	XAT Racing rolls fenders.

04-23-2008, 04:00 PM	#3 (permalink)
KAILUAZ Infidel Car: 86 & 93 Notch My TRGarage Tampa/St Pete : 1597369824	This guy comes to Tampa a lot, hit him up. http://www.tamparacing.com/forums/fo...rlando-fl.html

04-24-2008, 12:49 AM	#5 (permalink)
hombredelassrtas Carbon Fiber Connoisseur Car: Toyota Celica GT-S My TRGarage Tampa : 293826380	hmmm, if we dont grind mine out i'll have to hit you up

07-30-2008, 01:09 PM	#7 (permalink)
tbtstud17 04 azure mach 1 Car: 04 mach1 My TRGarage temple terrace : 1095	still need your fenders rolled?

07-30-2008, 05:17 PM	#8 (permalink)
Integra21 Registered User Car: 2000 S2000 My TRGarage Tampa, FL : 13994382	importguy1208 on the board does fender rolling and will prob do mine once my enkei's come in. he does good work. he worked on my buddies jdm dc2

08-05-2008, 10:08 PM	#9 (permalink)
Dntrmmbr Registered User Car: My TRGarage : -70	do it your self with a pipe and drive while having some one hold in place with presure.

08-06-2008, 05:08 PM	#10 (permalink)
hombredelassrtas Carbon Fiber Connoisseur Car: Toyota Celica GT-S My TRGarage Tampa : 293826380	i plan to just cut that part out. get better clearence then rolling and less chance of bending the fender. these cheap jap cars will crush like a tin can if its done wrong

08-08-2008, 02:32 AM	#11 (permalink)
kumar. Where is Harold? Car: Slow & Low. My TRGarage New Tampa : 2147483647	I rolled my friends fenders on his xb, and they came out perfect. though I used the eastwood fender roller. works like a charm with a heat gun.

08-08-2008, 03:04 AM	#13 (permalink)
FrodoGT Found the Vtec switch. Car: Honda civic My TRGarage Sarasota : 521970094	I have the upgraded eastwood roller in my garage. Rolled my fenders with it.

08-11-2008, 12:39 AM	#15 (permalink)
hombredelassrtas Carbon Fiber Connoisseur Car: Toyota Celica GT-S My TRGarage Tampa : 293826380	aaron i plan to go carbon which we will have to cut. i am waiting to figure out if i am doing a different bodykit as i'd rather just leave the car with you a week or so and get it all done at once. in the next month or so i should have deffinite plans we can discuss.