Am I doing this wrong? (Exhaust tips)

HullBreach · 09-11-2007, 11:19 PM

Well I spent about 20 minutes with some eagle one nano-polish (followed the instructions to a T) rubbing the crap on one of my exhaust tips (they were showing some wee surface cancer spots) to almost no effect whatsoever.

I used a foam applicator pad to put it on, a clean microfiber cloth to rub it in, and a clean terrycloth towel to remove the excess. This had almost no effect.

Is there something Im missing? Or is it just an elbow grease thing?

(by the way, this was 20 minutes on one tip, just on the top side)

killerMikeD · 09-11-2007, 11:54 PM

try steel wool to remove the harsh rust like spots, then go over with the polish, just make sure its the FINEST steel wool.

Southern_SS · 09-14-2007, 10:03 PM

don use the pad to polish. just use your bare fingers.

nismomatt96 · 10-03-2007, 09:39 PM

What type of metal are the tips? I might be able to point you in the direction of a good polish or cleaner.

I want a car · 10-05-2007, 01:32 AM

Use mothers on your exhaust it has a really good turnout... pics... this is not me car its some guy in texas that uses mothers.

**351coupe** · 10-05-2007, 03:52 PM

Fine steel wool with glass cleaner,then any polish you want.

09-11-2007, 11:19 PM	#1 (permalink)
HullBreach Registered User Car: My TRGarage : 96909739	Am I doing this wrong? (Exhaust tips) Well I spent about 20 minutes with some eagle one nano-polish (followed the instructions to a T) rubbing the crap on one of my exhaust tips (they were showing some wee surface cancer spots) to almost no effect whatsoever. I used a foam applicator pad to put it on, a clean microfiber cloth to rub it in, and a clean terrycloth towel to remove the excess. This had almost no effect. Is there something Im missing? Or is it just an elbow grease thing? (by the way, this was 20 minutes on one tip, just on the top side)

09-11-2007, 11:54 PM	#2 (permalink)
killerMikeD Lethal Fabrication Car: S10 Hardbody 64 caddy 41 chevy My TRGarage Brandon : 119260933	try steel wool to remove the harsh rust like spots, then go over with the polish, just make sure its the FINEST steel wool.

09-14-2007, 10:03 PM	#3 (permalink)
Southern_SS Registered User Car: 03 silverado SS, 91 300zx My TRGarage valrico : 141150	don use the pad to polish. just use your bare fingers.

10-03-2007, 09:39 PM	#4 (permalink)
nismomatt96 Nissan, it's what I do... Car: My TRGarage Eagle Lake aka SW Winter Haven : 10	What type of metal are the tips? I might be able to point you in the direction of a good polish or cleaner.

10-05-2007, 01:32 AM	#5 (permalink)
I want a car Registered User Car: My TRGarage : 163	Use mothers on your exhaust it has a really good turnout... pics... this is not me car its some guy in texas that uses mothers.

10-05-2007, 03:52 PM	#6 (permalink)
351coupe is working on something Car: Fords My TRGarage tampa : 2044337974	Fine steel wool with glass cleaner,then any polish you want.