**SR Parts For Sale: GT2871R .64/Greddy/Moroso/ACT/Fidanza/OEM**
**SR Parts For Sale: GT2871R .64/Greddy/Moroso/ACT/Fidanza/OEM**
* * * * PRICE DROP ON ALL PARTS * * * *
Hey guys, I have some SR parts for sale that I don't need as I've upgraged my setup.
First off, a genuine Garrett GT2871R turbo (2-bolt 52 trim compressor) with a 0.64 A/R turbine housing. The turbo has ~2000 babied miles on it with a normal (minimal) amount of DBB turbo shaft play. The turbo ID tag reads: GTSJ0403C on the top line and the bottom line reads: 472560-15
LET ME BE VERY CLEAR AND STATE THAT THIS TURBO HAS ONE 100% EASILY FIXABLE IMPERFECTION; THE COOLANT FEED PORT ON THE CHRA IS STRIPPED. I put a little too much trust into one of my friends to install turbo lines and he managed to strip the cast iron CHRA with an aluminum fitting. LOL don't ask me how. You COULD run it with no coolant but I don't like that idea. I sourced a stainless steel -6 AN fitting (common turbo line size) that can be welded to the CHRA at the hex on the fitting so there would be no issues. It has Circuit sports SS studs on the turbine housing and the wastegate flapper has been welded shut for an EWG setup. Also, the turbine housing has been ceramic coated black.
PRICE: $850 shipped and Paypal'd AS-IS OR $900 shipped and Paypal'd and it'll have the SS fitting welded to the CHRA by a professional welder.
PICS:
-New Greddy oil pan for SR20 WITH HARDWARE. I put it on, ran the motor for an hour, took it off, put it back on and took it off the next day due to a change in my setup. It's never been out of the garage.
PRICE: $300 shipped and Paypal'd
PICS:
-BRAND NEW SR20 Moroso aluminum oil pan
PRICE: SOLD!!!
-ACT 6-puck sprung clutch kit with a Fidanza 11 lb. Flywheel
PRICE: SOLD!!!
-USED S14 SR20 oil pickup
PRICE: SOLD!!!
Call or Text me at 813-957-3490 for the fastest response
I check PM's every other day
I'm located in the Town N Country area in Tampa, FL 33615
Local pickup is always welcome
Thanks for looking!!!
-Beau
Hey guys, I have some SR parts for sale that I don't need as I've upgraged my setup.
First off, a genuine Garrett GT2871R turbo (2-bolt 52 trim compressor) with a 0.64 A/R turbine housing. The turbo has ~2000 babied miles on it with a normal (minimal) amount of DBB turbo shaft play. The turbo ID tag reads: GTSJ0403C on the top line and the bottom line reads: 472560-15
LET ME BE VERY CLEAR AND STATE THAT THIS TURBO HAS ONE 100% EASILY FIXABLE IMPERFECTION; THE COOLANT FEED PORT ON THE CHRA IS STRIPPED. I put a little too much trust into one of my friends to install turbo lines and he managed to strip the cast iron CHRA with an aluminum fitting. LOL don't ask me how. You COULD run it with no coolant but I don't like that idea. I sourced a stainless steel -6 AN fitting (common turbo line size) that can be welded to the CHRA at the hex on the fitting so there would be no issues. It has Circuit sports SS studs on the turbine housing and the wastegate flapper has been welded shut for an EWG setup. Also, the turbine housing has been ceramic coated black.
PRICE: $850 shipped and Paypal'd AS-IS OR $900 shipped and Paypal'd and it'll have the SS fitting welded to the CHRA by a professional welder.
PICS:
-New Greddy oil pan for SR20 WITH HARDWARE. I put it on, ran the motor for an hour, took it off, put it back on and took it off the next day due to a change in my setup. It's never been out of the garage.
PRICE: $300 shipped and Paypal'd
PICS:
-BRAND NEW SR20 Moroso aluminum oil pan
PRICE: SOLD!!!
-ACT 6-puck sprung clutch kit with a Fidanza 11 lb. Flywheel
PRICE: SOLD!!!
-USED S14 SR20 oil pickup
PRICE: SOLD!!!
Call or Text me at 813-957-3490 for the fastest response
I check PM's every other day
I'm located in the Town N Country area in Tampa, FL 33615
Local pickup is always welcome
Thanks for looking!!!
-Beau
Last edited by 92RMS13; 08-03-2012 at 09:00 PM.
s15 turbos are 675 shipped from nissan dealers. And have you called boost lab or anywhere to see if a helicoil is viable?
__________________
I love my honda, when it pressure washes my nissan.
Build threads
S13 coupe
https://www.tamparacing.com/forums/n...ht-purple.html
Kouki
https://www.tamparacing.com/forums/nissan-builds-projects/688726-kouki-project.html
I love my honda, when it pressure washes my nissan.
Build threads
S13 coupe
https://www.tamparacing.com/forums/n...ht-purple.html
Kouki
https://www.tamparacing.com/forums/nissan-builds-projects/688726-kouki-project.html
Last edited by Jared Noriega; 08-01-2012 at 06:18 AM.
^The lowest I found was $725+shipping. The prices went way down on those suckers since I last checked. I thought about helicoiling the threads but it seems like it would be a better option to have the fitting welded on the CHRA in my opinion.
Thread
Thread Starter
Forum
Replies
Last Post
92RMS13
For Sale/WTB Nissan
5
06-10-2012 07:01 AM
evovin
For Sale/WTB Mitsubishi
0
07-17-2008 11:00 PM
Bandit1
For Sale/WTB Nissan
1
02-08-2008 11:36 AM