Couple 500+hp 240's on Dyno

[Torrential]

Both cars are on Rom tunes tuned by Martin @ Fever Racing and pulls were performed Saturday morning.
YouTube - Fever Racing s14.5 on Dyno Race Gas
YouTube - Fever Racing Calbo 240 on Dyno race gas

As you can see dyno errored out on my pull but you get the idea, car ended up making 554whp on the big boy tires we leaned it out a bit more afterwards, we'll see the final numbers once a proper gear is added in to match the tires. 175mph in 4th gear on the dyno takes a while to slow down so we were limited on the pulls.

Calbo's car ended up making 540whp and 420wtq after he ran out of injector, he should crack 600 with some bigger injectors and some more boost, car is great he goes sideways on anything lower than a 60 roll. Might be time for some stickier tires falken azenis aren't cutting it anymore.

3/16/10
Ed's (Torrential) car.. bottom of 2nd through top of 4th (20-130mph)

http://www.youtube.com/watch?v=w5Y9za8M8sU

still have this on a romtune !

[Petes s13]

How much Torque did you make? Congrats on the numbers.

[Blackzenki82]

540/420.... man, what a difference.. awesome numbers tho for sure... what's the "set up" you don't have to list details, just kinda wondering what it would take for a motor like that...

[Z350man]

500hp 240s are slow! good numbers.

[mewantkouki]

540/420.... man, what a difference.. awesome numbers tho for sure... what's the "set up" you don't have to list details, just kinda wondering what it would take for a motor like that...

^3071r, and a baller manifold.

[+Waldo+]

solid

[STORM]

Congrats on the numbers!

[Mysterious Driver]

Sucks your diff is gone me and tony headed out last night and called calbo but it was to late. Great to see his car back at it's prime and your car still what it is

[Torrential]

Both motors are still stock displacement on tomei solid lifters and stock rods, were both running bc 272 step 3 cams. Calbo's motor is an s14 sr though, freddy intake manifold, alchemy manifold, nismo 740's and the sc61.

My setups pretty public I think its somewhere on here but basically, s13 sr, martin built the motor, mazworx race head, reshimmed by martin on bc 272 step 3 cams, full race 3076r twin scroll twin gate kit, precision 1000cc injectors, greddy intake manifold. With a rom tune of course, I ended up making 473tq only on the big tires and the j30, should see a big difference with the xterra diff or if I go back back to a 26 inch tire with a z32 diff.

[Z350man]

when are you putting the diff in? me, you and calbo need to get to bradenton!

[asia989]

does martin ever wear shoes?? seems he shall be known as the sandal king

[JR.]

looking good guy, congrats to calbo and ed...

the colt has no chance vs this 240s, damit.

[Mysterious Driver]

when are you putting the diff in? me, you and calbo need to get to bradenton!

Still thinking about the JDM dreams event for the 27th at bradenton?

[Hotcakes0007]

[Mysterious Driver]

^where were you we was trying to figure out if you guys wanted to head out also last night?

heard it was a good turn out...either way calbo is coming out this sat and sunday finally see what the diff is on a vid and real life