nismo slave cylinder

storey · 12-28-2006, 01:21 AM

product review:

car: S13

i run a spec stage d clutch Enjuku Racing *SPEC D Complete Clutch System which made my pedal pressure much heavier than stock. the nismo slave cylinder made the pedal pressure feels great. just like stock again. i definitly recommend this product if your running a heavy clutch. the install was very easy.

i found a really good price too. Welcome - Nengun Performance

$105+20 for shipping(from japan)

aaron

steve · 12-28-2006, 10:55 AM

or you could of done a 300z one for a lot cheaper

storey · 12-28-2006, 11:52 AM

do you have direct experience with this? what diamater is that one? i have not read any concrete info on this board or freshalloy.com about the 300z slave cylinder being comparable to a nismo one. last i read on FA is that the 300z slave cylinder is the same as the stock one on the 240sx and that any differences felt were in the operators head or the slave cylinder they replaced was bad. all i found were posts like this:

Nismo Slave Cylinder - FreshAlloy.com Forums

if someone had done a little write up about a 300z slave cylinder that would have been great. all i have found is "forum hearsay" like what you wrote.

furthermore, please don't blurt out statements without listing some type of information to support you arguement.

aaron

**Epstein** · 12-28-2006, 03:16 PM

The 300ZX slave cylinder upgrade is a farce. I found the slave cylinder diameter in all of the Z31 FSMs. They are all the same, and equivalent to the 240sx one.

I've also heard positive reviews of the Nismo slave. $105 is a steal! Best price I've seen up to this point is ~$180.

12-28-2006, 01:21 AM	#1 (permalink)
storey Registered User Car: 91 240sx My TRGarage rockledge, fl : 10	nismo slave cylinder product review: car: S13 i run a spec stage d clutch Enjuku Racing SPEC D Complete Clutch System which made my pedal pressure much heavier than stock. the nismo slave cylinder made the pedal pressure feels great. just like stock again. i definitly recommend this product if your running a heavy clutch. the install was very easy. i found a really good price too. Welcome - Nengun Performance $105+20 for shipping(from japan) aaron Last edited by storey : 12-28-2006 at 01:51 PM.*

12-28-2006, 11:52 AM	#3 (permalink)
storey Registered User Car: 91 240sx My TRGarage rockledge, fl : 10	do you have direct experience with this? what diamater is that one? i have not read any concrete info on this board or freshalloy.com about the 300z slave cylinder being comparable to a nismo one. last i read on FA is that the 300z slave cylinder is the same as the stock one on the 240sx and that any differences felt were in the operators head or the slave cylinder they replaced was bad. all i found were posts like this: Nismo Slave Cylinder - FreshAlloy.com Forums if someone had done a little write up about a 300z slave cylinder that would have been great. all i have found is "forum hearsay" like what you wrote. furthermore, please don't blurt out statements without listing some type of information to support you arguement. aaron Last edited by storey : 12-28-2006 at 01:56 PM.

12-28-2006, 10:55 AM	#2 (permalink)
steve madpom Car: Car: Car: My TRGarage england : 80459026	or you could of done a 300z one for a lot cheaper

12-28-2006, 03:16 PM	#4 (permalink)
Epstein Un-retired Mod Car: 08 Element SC, 93 240sx Coupe My TRGarage Clearwater : 458864491	The 300ZX slave cylinder upgrade is a farce. I found the slave cylinder diameter in all of the Z31 FSMs. They are all the same, and equivalent to the 240sx one. I've also heard positive reviews of the Nismo slave. $105 is a steal! Best price I've seen up to this point is ~$180.