240 2jz shifter extension with pictures

BABILLARACING · 01-21-2009, 05:51 PM

here are some pictures of the lenght of the shifter. I am posting them cause I look everywhere and could'nt find them anywhere and I might help somebody and I know for a fact that tech 2 won't share that info

extension of 3.250" according to a person who bought the shifter from tech 2

here is mines done by me also

here is mines closed with marling crawling forged first gear thrust washer and bearring carrier installed also everything done by me

if you want to buy the 1jz bellhousing buy it from champion toyota in texas they sell it for $300 plus shipping is way cheaper than driftmotion and tech 2 . here is the phone # 1-713-943-7010 ask for Jeff , he will hook you up
hope this help......................Omar

**Matt Vassallo** · 01-21-2009, 05:57 PM

So thi is for S13 / S14 chassis with a 1J / 2j? What crossmember and what mounts ?

BABILLARACING · 01-21-2009, 06:02 PM

this will work on a s14 or s13 and can be used with a 1j or 2j and for the mounts as soon I get done with them I will post pictures also .............Omar

BABILLARACING · 03-22-2009, 09:19 PM

more updates
motor

I fabricated the mounts here are the clearance

tranny mount

motor in

Mr. X · 03-22-2009, 10:07 PM

Nice work!

BABILLARACING · 03-22-2009, 10:09 PM

thanks man

Z28ricer · 03-23-2009, 01:36 AM

That should be pretty badass, we'll have to do some runs against my LQ9/T56 soon

robunicu · 03-23-2009, 02:10 AM

hot stuff dude... cant wait to see this baby on the street

Z28ricer · 03-23-2009, 02:15 AM

Can you post some pics of straight down in between the motor / radiator to show water pump to radiator clearance ?

BABILLARACING · 03-23-2009, 08:10 AM

sure I take some today

NeedCAforS13 · 03-23-2009, 10:30 AM

looks good, but damn. i would destroy that oil pan. my sway bar hits everywhere I go... it protects my SR pan, but I think that one would be done.

+Waldo+ · 03-23-2009, 11:42 AM

ditto

but we are just ricers that are low to be cool

to OP, good work man, fabrication on the parts looks great

Z28ricer · 03-23-2009, 12:22 PM

Quote:

Originally Posted by +Waldo+

ditto

but we are just ricers that are low to be cool

to OP, good work man, fabrication on the parts looks great

Fast > Low

NeedCAforS13 · 03-23-2009, 12:24 PM

why? say's who?

low and slow bitches.

Z28ricer · 03-23-2009, 12:25 PM

Quote:

Originally Posted by NeedCAforS13

why? say's who?

low and slow bitches.

Says 2nd place is the first loser

01-21-2009, 05:51 PM	#1 (permalink)
BABILLARACING Registered User Car: My TRGarage : 170336329	240 2jz shifter extension with pictures here are some pictures of the lenght of the shifter. I am posting them cause I look everywhere and could'nt find them anywhere and I might help somebody and I know for a fact that tech 2 won't share that info extension of 3.250" according to a person who bought the shifter from tech 2 here is mines done by me also here is mines closed with marling crawling forged first gear thrust washer and bearring carrier installed also everything done by me if you want to buy the 1jz bellhousing buy it from champion toyota in texas they sell it for $300 plus shipping is way cheaper than driftmotion and tech 2 . here is the phone # 1-713-943-7010 ask for Jeff , he will hook you up hope this help......................Omar

01-21-2009, 05:57 PM	#2 (permalink)
Matt Vassallo lifelong learner Car: 93 nissan My TRGarage New Tampa : 227674636	So thi is for S13 / S14 chassis with a 1J / 2j? What crossmember and what mounts ?

01-21-2009, 06:02 PM	#3 (permalink)
BABILLARACING Registered User Car: My TRGarage : 170336329	this will work on a s14 or s13 and can be used with a 1j or 2j and for the mounts as soon I get done with them I will post pictures also .............Omar

03-22-2009, 09:19 PM	#4 (permalink)
BABILLARACING Registered User Car: My TRGarage : 170336329	more updates motor I fabricated the mounts here are the clearance tranny mount motor in

03-22-2009, 10:07 PM	#5 (permalink)
Mr. X SigArms Car: My TRGarage Unkown Place : 169281239	Nice work!

03-22-2009, 10:09 PM	#6 (permalink)
BABILLARACING Registered User Car: My TRGarage : 170336329	thanks man

03-23-2009, 01:36 AM	#7 (permalink)
Z28ricer Spaghetti Mt is breakfast Car: 93 240sx My TRGarage Tampa, FL : 185394319	That should be pretty badass, we'll have to do some runs against my LQ9/T56 soon

03-23-2009, 02:10 AM	#8 (permalink)
robunicu KA-T beast Car: My TRGarage : 163079175	hot stuff dude... cant wait to see this baby on the street

03-23-2009, 02:15 AM	#9 (permalink)
Z28ricer Spaghetti Mt is breakfast Car: 93 240sx My TRGarage Tampa, FL : 185394319	Can you post some pics of straight down in between the motor / radiator to show water pump to radiator clearance ?

03-23-2009, 08:10 AM	#10 (permalink)
BABILLARACING Registered User Car: My TRGarage : 170336329	sure I take some today

03-23-2009, 10:30 AM	#11 (permalink)
NeedCAforS13 That just happened. Car: E46 M3 My TRGarage Oldsmar : 405555467	looks good, but damn. i would destroy that oil pan. my sway bar hits everywhere I go... it protects my SR pan, but I think that one would be done.

03-23-2009, 11:42 AM	#12 (permalink)
+Waldo+ Electronicals master ;P Car: S14, Empty Walet My TRGarage Tampa : 2062855007	ditto but we are just ricers that are low to be cool to OP, good work man, fabrication on the parts looks great

03-23-2009, 12:24 PM	#14 (permalink)
NeedCAforS13 That just happened. Car: E46 M3 My TRGarage Oldsmar : 405555467	why? say's who? low and slow bitches.