howdy hey

[mister-2]

I am down in FL from missouri. I just spent a week in tampa with my boy nick carter (not the back street boy ). Anyhow he told me about the site so Im prolly gonna be on and off here between trips to tampa. nice site
\\\


btw way, I drive a 91 black NA with a 3sgte swapped in. I installed: a full T4 50 trim turbo, 46MM external wastegate, 3 inch downpipe, 3 inch exhaust with a titanium muffler, spec stage 3 clutch and fidanza lightweight flywheel, and am on the verge of buying/installing an A/W intercooler setup. Aside from the Kosei K1 16x8.5" rears and 16x7.5" front wheels, the exterior is stock.


pics in my sig of the mr2

[cornhusker]

are you the guy i saw the other night, i have a red one with an n/a to turbo swap

[mister-2]

the one that wasnt running right? ya I remember you! Ever find the vacum leak? You should really replace that little angle peice that connects to the by pass valve as well as tighten up that intake peice that connects to the turbo.

you might also want to look into replacing your dist. cap and rotor, plug wires, and plugs. go toyota with all those except the plugs, buy a set of NGK 6097's (copper plugs) and gap them to .28


it was good to meet some other people with swapped mr2's there arent but like 3 I know of in st louis MO

[cornhusker]

ya i got the curved piece and replaced the turbo one, it runs better but prolly need to do those other things, thanks a lot

[senor honda]

Welcome to TR. You seem to know your stuff, tuning-wise.-Bob

Originally Posted by mister-2

the one that wasnt running right? ya I remember you! Ever find the vacum leak? You should really replace that little angle peice that connects to the by pass valve as well as tighten up that intake peice that connects to the turbo.

you might also want to look into replacing your dist. cap and rotor, plug wires, and plugs. go toyota with all those except the plugs, buy a set of NGK 6097's (copper plugs) and gap them to .28


it was good to meet some other people with swapped mr2's there arent but like 3 I know of in st louis MO

[mister-2]

Originally Posted by senor honda

Welcome to TR. You seem to know your stuff, tuning-wise.-Bob

holy jesus is your avatar for real? small block in a honda?! Honestly?! damn, if you did the work to fab up the motor mounts to put a small block in a honda then IM impressed.


do you know wolf? Hes got a 260Z with a small block stroked to a 383 in it. Hes building a 496 (true 502) in his garage for another import-domestic hybrid project. Now that guys a pimp if I ever met one

[senor honda]

As a clarification......I have the hi-rise hood to allow clearance for
an air filter from a 351 CI police Interceptor, *not* the entire motor.
I made a cowl-inducted cold air box that pressurizes the carb slightly
and when you need to accelerate, It gulps the air and you can hear it moan!
It was the last year for a carbed 2 liter Accord, a technology I understand
maybe better than fuel injection and electronics. When I had the automatic in it, it would spin the tires in "D" just by flooring it. (Something I have to exercise self control over)

However, the idea of fabricating a side-winding small block in a Honda sounds like an interesting project........some bracing required, though.-Bob

Never met Wolf, but I would like to see his work. That sounds like one awesome car of his......and the new project? Alriiiight!

Originally Posted by mister-2

holy jesus is your avatar for real? small block in a honda?! Honestly?! damn, if you did the work to fab up the motor mounts to put a small block in a honda then IM impressed.

do you know wolf? Hes got a 260Z with a small block stroked to a 383 in it. Hes building a 496 (true 502) in his garage for another import-domestic hybrid project. Now that guys a pimp if I ever met one

[Silvia]

welcome !!!!

[mister-2]

Thanks!!!!!

[R6Mitsu]

Que?

[TwistedGrilles]

R u the guy I talked to at the hillsborough sonic meet on Saturday? Sounds like u kno a little bit about mr2s. Check out Mister2 he is my welder and he has one. Late.