Closed Thread
Results 1 to 15 of 15
Thread: '91 civic si hatch
-
05-04-2008 10:52 PM #1
'91 civic si hatch
i got a '91 civic si hatch and i need prices on swapping to a B18C1 or B18c5.
how much would it be to swap in and how hard would it be?
also i wanna run 12-15 psi turbo on it to. how much for all? and install
-
05-05-2008 07:58 AM #2
PLease give us a call at the shop. We can discuss some options for you.
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
-
05-05-2008 09:57 PM #3
damn
dont you think $5500 for a swap is a little expensive?
and the same just to add a turbo to the swap is another $6500?
that's insane not trying to diss you or anything but damn
-
05-05-2008 09:59 PM #4
quality+reliabilty=a decent amount of cash
-
05-05-2008 10:22 PM #5
just for a swap and turbo its $12,000. i mean for that i could buy another car with that power and it's be newer at the same time.
-
05-05-2008 10:24 PM #6
You get what you pay for. Our work is in my opinion the best around. We are not your run of the mill back yard mechanic shop... we warranty all of our engine swaps.

www.LHTPerformance.net
Hondata Tuning : Turbo Fabrication : Engine Building
Shp # 727 344 1800
-
05-05-2008 10:31 PM #7
how longs your warranty for?
and i'm not saying you guys are bad or anything.
i'm just being like this cause i dont have $12,000 to spend i'm only 18. lol
but i wish i did caused i'd have it done.
also how long would it take to swap it and tune it all?
-
05-05-2008 11:05 PM #8Banned
- Join Date
- Sep 2005
- Posts
- 1,279
- Feedback Score
- 2 (100%)
ill be getting my exhaust done by lht. do i think its a little pricey?
yes, yes i do.
but do i think the quality, materials used, and them doing it right worth it?
yes without a doubt.
-
05-05-2008 11:43 PM #9death
- Join Date
- Aug 2007
- Location
- tampa
- Posts
- 4,665
- Feedback Score
- 2 (100%)
-
05-06-2008 06:09 AM #10
$5500 for swap. getting the engine and putting it in by lht.
-
05-06-2008 07:51 AM #11death
- Join Date
- Aug 2007
- Location
- tampa
- Posts
- 4,665
- Feedback Score
- 2 (100%)
-
05-06-2008 08:16 AM #12
Before posting negative comments, maybe your not seeing the whole picture.
$5500 to install and provide everything ready to drive knowing is done by LHT is actually a very good price.
1, You get one of our hand picked GSR 99 or newer with new timing belt and water pump
2, LHT NON Vibration mounts( Not haspsort, E-Ghey or some guy on TR)
3, You get converted to OBD-1 with a GSR or Hondata ECU
4, You get an LHT Hydro conversion( Not an old wore out B16 Tranny)
5, The right hoses, cables and exhaust installed correctly.
6, You get LHT Quality, We've been in business doing this Professionally for 10 years.
As stated, We are not a fly by night back yard shop.Check us out a little further before making comments.
Thanks, John.www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
-
05-06-2008 09:06 AM #13
can't wait to get some money and have them install something on my hatch
-
05-06-2008 02:10 PM #14
its nothing negative. im sure the work is great.
but why $6500 for a turbo set up?
-
05-06-2008 02:32 PM #15
Again, Calling us would be better than calling us out on here.
OK, Here's the Specs on the LHT400 AC and Power steering
LHT Manifold
LHT 3" Stainless Downpipe with flex and stainless flanges
LHT Stainless re circ dump tube
LHT Spec Precision Turbo
Stainless feed and drain lines
Precision Intercooler
LHT Aluminum intercooler piping with intake and filter
TIAL Waste gate
TIAL BOV
2 SPAL cooling fans
Hondata S100
Precision 880 cc injectors
Walboro fuel pump
Complete 3" Stainless exhaust
Full tuning including dyno tuning by us
Boost gauge.
You can see examples of our work, I think our reliablity and quality speak volumes.www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)



LinkBack URL
About LinkBacks
RECARO SEATS
