LHT400 turbo on a 2004 RSX-S

[MrLHT]

This car belongs to a good custom that has had several cars built by LHT. This is our LHT400 turbo, it uses a Precision GT30R turbo, LHT manifold and 3" stainless downpipe and full exhaust, Tial wastegate, Tial BOV, stainless oil lines, Precision intercooler , LHT intercooler piping( Notice the fog lights still fit)
Greddy Profec B and of Course Hondata K-Pso.
Ths kit is designed to be a full Street kit good upto around 450whp with great sppol up, This motor is stock so we'll keep it around 300whp.

With all LHT tuning, we not only tune for power and reliablity we tune for gas mileage. We usually increase gas mileage 4-5 mpg in most cases.The LHT Type R geats 34mpg on the highway with a type r tranny and 600 + whp.
With the gas prices increasing almost daily, this is more important than ever.

Take a look..

Before.

One of the intercooler pipes tacked in place


Of course the WG is routed into the down pipe so no noise under boost. Some say this robs power, Our Type R is 647 whp with this setup....





The AC and coolant lines are wrapped and a custom heat shield help controls temps.



Notice the intercooler fits with the fog lights. LHT can build intercooler piping for any vehicle .

[HonkeyDong]

nice work

[Liquid]

very nice!
the intercooler piping looks great!

[MrLHT]

Here's some pictures of the LHT 3" Stealth exhaust, Notice the polished tip matches the angle of the bumper. It's a full 3" stainless with a ceramic coated muffler.





LHT builds exhaust for any vehicle, We build mandrel bent 2.5 , 3 and 4" exhausts.

[Drama Llama]

[MrLHT]

Here's some more pics with the Good old Type R Valve cover which makes the whole thing come together.
The car was street tuned and dynoed tuned today and delivered back the customer. On the dyno at 9.5 psi the car dynoed at 307whp and hit full boost by 4200 rpms.
He's the pics





Here's the before and after. You will notice a few little extra things we do to clean up the engine bay. We havn't been a fan of the big AC line going across the motor or the two cales. There now rerouted.
You get that little extra TLC at LHT.

160 ish whp



307 whp.

[noh22forme]

wow. everything is really clean.

[Jap]

Looks like a RevHard mani . Who casts your manifolds ?

How much do you charge for a manifold/dp combo ?

Please PM T3 flanged 5 bolt DP

PS Swap looks clean . Power slightly low but longevity is of concern i'm sure

[MrLHT]

When we build and tune street cars, we don't run them on the edge just to show "Peak numbers", We tune for reliabilty and mid range.
The 9.5 psi I mentioned was the "Peak" on the Profect B , it closer to 8.5 - 9 psi most of the pull.