CRX with LHT400 turbo

MrLHT · 01-25-2008, 05:14 PM

This is a CRX which has been in the show scene since the late 90s.It is the original Gull wing door CRX before the kits were even thought about. We complety rebuilt the engine,Turbo system and wiring and installed Hondata.The Kt is based on our LHT400 setup, the car never came with AC but it is compatable .
Below are a couple of pics and the dyno run we just finished.
More pics to come when it's been cleaned.

Dyno: Click on the link

http://

**.:Chris:.** · 01-25-2008, 06:07 PM

WTF John, no pics of the car?

MrLHT · 01-25-2008, 06:28 PM

There coming.....

**.:Chris:.** · 01-25-2008, 06:56 PM

Ok. See you later.

MrLHT · 01-26-2008, 12:57 PM

This is how the engine bay looked before we started the build:

It had a holly cammander fuel injection stand alone, 550 cc injectors and an FMU. It never really ran right, then a shop in Tampa blow it up first pull on the dyno.

This is what some of the junk looked like when we removed it, We installed a factory harness and coverted to OBD-1 with Hondata.

Here's the engine, an LHT complete build. Golden Eagle sleeves, CP pistons , crower rods, OEM crank, bearing etc.

The finished engine, LHT400 Turbo kit , LHT built , installed and tuned.

The driving away pic.

01-25-2008, 05:14 PM	#1 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Location: Tampa Fl TRader Rating: (7) : 13273247	CRX with LHT400 turbo This is a CRX which has been in the show scene since the late 90s.It is the original Gull wing door CRX before the kits were even thought about. We complety rebuilt the engine,Turbo system and wiring and installed Hondata.The Kt is based on our LHT400 setup, the car never came with AC but it is compatable . Below are a couple of pics and the dyno run we just finished. More pics to come when it's been cleaned. Dyno: Click on the link http:// Last edited by MrLHT : 01-27-2008 at 12:18 PM.

01-26-2008, 12:57 PM	#5 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Location: Tampa Fl TRader Rating: (7) : 13273247	This is how the engine bay looked before we started the build: It had a holly cammander fuel injection stand alone, 550 cc injectors and an FMU. It never really ran right, then a shop in Tampa blow it up first pull on the dyno. This is what some of the junk looked like when we removed it, We installed a factory harness and coverted to OBD-1 with Hondata. Here's the engine, an LHT complete build. Golden Eagle sleeves, CP pistons , crower rods, OEM crank, bearing etc. The finished engine, LHT400 Turbo kit , LHT built , installed and tuned. The driving away pic. Last edited by MrLHT : 01-26-2008 at 12:59 PM.

01-25-2008, 06:07 PM	#2 (permalink)
.:Chris:. <-can post announcements! Car: Turbo Teal GSR My TRGarage Location: Saint Petersburg, Florida TRader Rating: (0) : 553938114	WTF John, no pics of the car?

01-25-2008, 06:28 PM	#3 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Location: Tampa Fl TRader Rating: (7) : 13273247	There coming.....

01-25-2008, 06:56 PM	#4 (permalink)
.:Chris:. <-can post announcements! Car: Turbo Teal GSR My TRGarage Location: Saint Petersburg, Florida TRader Rating: (0) : 553938114	Ok. See you later.