+ Reply to Thread
Results 1 to 9 of 9
Thread: LHT PRODUCTS -Parts
-
11-06-2007 02:03 PM #1
LHT PRODUCTS -Parts
LHT Breather can.
This is designed to work as a crank case breather. It comes with fittingwhich screw into the back of the block which reliveve pressure in the crank case .
The clear braided hose wont get mushy from hot oil vapor like some.
This is a must for Turbo cars and high reving NA motors. We have build and installed these for the last 5 years but now keeping them in stock. As used and tested on the LHT Type R for 2 years.
$139.00 shipped ( lower 48 states)


Picture of how the install looks

$139.00 shipped ( Lower 48 states only)Last edited by MrLHT; 02-08-2008 at 04:26 PM.
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
-
11-06-2007 02:56 PM #2
LHT Catch can.
This will pretty much work on any car, It is completely sealed and hooks between the Valve cover and intake.


$79.00 shippedLast edited by MrLHT; 11-09-2007 at 03:12 PM.
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
-
11-09-2007 02:26 PM #3
LHT Light weight Flywheel.
This is a one piece Chomoly Flywheel that weighs 11lbs.
We have found this to be the perfect weight, gives great throttle responce but not too light to cause stalling etc.
Great for Turbo or NA and is blanaced upto 10,000 rpms.
$219 shipped


$219 shipped or $210 pick up in person.
Call for pricing on ClutchMaster and Competion clutchs ( The clutch's LHT uses)Last edited by MrLHT; 11-28-2007 at 08:47 AM.
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
-
11-20-2007 11:59 AM #4
LHT 68mm Throttle body.
This is OEM quality with no sticking issues , perfect fitment and great quality.
This is as close to Honda as it gets, but bigger!
These are for B series ,S2000, SOHC, They may fit others.
We use these on all our builds and or own cars.I have used this on the LHT Type R for over a year with no issues at all
We don't sell anything we do test, Everything we sell we use ourselves
$229.00 shipped.



$229 shippedLast edited by MrLHT; 11-25-2007 at 11:06 PM.
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
-
12-16-2007 10:08 PM #5
I have the Throttle Body and Breather Can on my set up and love em' both. No issues, great products! Thanks John!
-
12-17-2007 08:04 AM #6
Thanks , hope your drive to SC was safe.
Stay in touch.www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
-
12-19-2007 01:38 PM #7
Take an extra 10% off till the end of the year.
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
-
01-07-2008 10:58 PM #8
HONDATA The only System LHT uses!
S100 in stock $195
S300 in Stock $595
Buy a Hondata and get the ECU for only $149
Buy a K Pro w' Tuning package and the Hondata intake manifold gasket's Free !!www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
-
02-14-2008 04:36 PM #9
Hondata gaskets in stock $49.99 No waiting!
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)



LinkBack URL
About LinkBacks
Reply With Quote