+ Reply to Thread
Results 1 to 15 of 18
Thread: Tune?
-
08-29-2007 03:07 PM #1aint no reg. spec-v
- Join Date
- Jul 2007
- Location
- where thieves are hated
- Posts
- 5,230
- Feedback Score
- 32 (97%)
Tune?
i have a hatch b16 turbo with a drag kit. its runnin off fmu now safe and runs fine but i have 440cc RC injectors...can you guys give me a ball park estimate of what it would cost for a street tune?
-
08-29-2007 09:06 PM #2
I wouldn't want to do any kinda of tuning with an FMU. It really isn't the right way to go, We sell and use Hondata which will run fine with the 440cc injectors but give us full control over fuel and timing to make power and keep it safe.
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
-
08-29-2007 10:37 PM #3aint no reg. spec-v
- Join Date
- Jul 2007
- Location
- where thieves are hated
- Posts
- 5,230
- Feedback Score
- 32 (97%)
well couldnt you just un install fmu and put the injectors in?? cuz i have skunk2 programmin on my ecu but feel free to correct me
-
08-30-2007 12:04 AM #4
I would remove the FMU, Install the injectors and Hondata. You may be able to rechip your ECU for Hondata.
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
-
08-30-2007 01:35 PM #5infraction king
- Join Date
- Oct 1979
- Location
- out of the office
- Posts
- 19,081
- Feedback Score
- 44 (100%)
go hondata, its worth it

98 E36 ///M3 Sedan
07 Civic Si Sedan
-
09-02-2007 04:31 PM #6aint no reg. spec-v
- Join Date
- Jul 2007
- Location
- where thieves are hated
- Posts
- 5,230
- Feedback Score
- 32 (97%)
what if i get a greddy e-manage...it owuld be fully tuneable with that? i would get a good deal on one so seein if its worth it
-
09-02-2007 04:32 PM #7infraction king
- Join Date
- Oct 1979
- Location
- out of the office
- Posts
- 19,081
- Feedback Score
- 44 (100%)
cant be cheap when it comes to tuning. its the most omportant piece of the puzzle. go with the hondata, you can get it for $595

98 E36 ///M3 Sedan
07 Civic Si Sedan
-
09-02-2007 05:40 PM #8
I would never use an fmu or a "chipped ecu" in my car or any customer's car. With the options available today there is no reason a turbo Honda should still be running an fmu and "chipped ecu"
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP My Love Jillian Lacey Rivers 09/15/84 - 08/28/10
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
-
09-02-2007 06:04 PM #9aint no reg. spec-v
- Join Date
- Jul 2007
- Location
- where thieves are hated
- Posts
- 5,230
- Feedback Score
- 32 (97%)
well the guy who had the car, used an fmu because i guess he ran out of money to complete the tuning process with injectors but if i had started it i wud have tuned it. hondata alone is 595? or the whole tuning because i see hondata s200 for sale for about 300. i just want to know what the full cost would be with hondata and a street tune so i can gather my money and get to lht.
-
09-02-2007 11:39 PM #10
S100 is $195 and we stock and sell tons of them, We have tuned cars with S100 upto 600whp .
You will need a Hondata ready ECU, S100 plus tuning. Give us a call so we can go over the whole packagewww.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
-
09-04-2007 10:07 PM #11aint no reg. spec-v
- Join Date
- Jul 2007
- Location
- where thieves are hated
- Posts
- 5,230
- Feedback Score
- 32 (97%)
i called a few days ago and today 3x and no answer. left my number on the machine about a tune...so im kinda waitin on you guys
-
09-05-2007 10:05 AM #12
We are very busy right now, Please leave you number and we will return your call ASAP.
We get 100+ calls a day and most people either don't leave there number or say there number so fast we can not figure it out.www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
-
09-05-2007 10:16 AM #13- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP My Love Jillian Lacey Rivers 09/15/84 - 08/28/10
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
-
09-05-2007 05:41 PM #14aint no reg. spec-v
- Join Date
- Jul 2007
- Location
- where thieves are hated
- Posts
- 5,230
- Feedback Score
- 32 (97%)
lol....i figured...813-451-6664 my name is brandon
-
09-16-2007 11:09 AM #15aint no reg. spec-v
- Join Date
- Jul 2007
- Location
- where thieves are hated
- Posts
- 5,230
- Feedback Score
- 32 (97%)
i called you guys numerous times in the past week even AFTER you said you would get back to me asap around 10 days ago...
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)



LinkBack URL
About LinkBacks
Reply With Quote
