We build Intercooler piping ( Aluminum)

MrLHT · 04-25-2007, 01:35 PM

We can custom build your intercooler piping , We use Aluminum piping bead rolled, 4 ply silicone connectors and heavy duty stainless clamps the will not blow off. Single turbo, twin turbo with merge joints, You name it.We can build it.

We can build 2.5" 2.75" and 3".

Satin, Polished and powder coated

Here's some samples:

MrLHT · 10-09-2007, 10:01 AM

We can also weld you pipes, mark them how you want them then bring em down. Stainless and aluminum.

SRT4beepo · 10-23-2007, 08:28 AM

how much would it cost??

MrLHT · 11-05-2007, 12:24 PM

Complete pipe kits with with intake + silicone connectors and clamps etc are $500 and up.

MrLHT · 11-25-2007, 11:21 PM

Here's another sample, we also sell Precision intercoolers.

ON the above picture, notice the support tab on the intercooler. This takes the stess off the connectors for reliablity and long service.

MrLHT · 11-25-2007, 11:25 PM

Make your appointemnt today for LHT to build you pipe kit.

You can piece your own turbo kit together and have LHT build the intercooler piping.
We have a fast turn around time, and build it right the first time!

Crab Cakes · 11-27-2007, 09:33 PM

how much for full 3inch piping and my precision 750hp core mounted lmk

-George

MrLHT · 11-28-2007, 08:22 AM

PM'ed sent

MrLHT · 01-09-2008, 08:57 AM

This is a complete intercooler piping we built for a K20 integra. The K20 was installed then brought to us for the intercooler piping and intercooler.
We modified a precision 600 intercooler and used all aluminum piping with 4 ply silicone connectors in black.
All the piping is bead rolled to prevent pipes poping off and braces to the pipes don't rub against anything.
This is a brushed finish, we can polish or powder coat and anodize the intercooler for a stealth look.

The finished product.

MrLHT · 01-24-2008, 05:38 PM

K20 Turbo in EG hatch.

All piping is aluminum and bead rolled, Notice the support to prevent the pipes rubbing against each other

MrLHT · 01-24-2008, 09:59 PM

We use Aluminum only on our intercooler piping, It's not only less than 1/4 the weight of steel or stainless it helps disaplate the heat like the intercooler itself.
Call LHT today for your intercooler piping on any vehicle.

MrLHT · 03-04-2008, 04:03 PM

Here's a complete LHT intercooler and pipe kit with 90 psi.
You get what you pay for.

iamboon · 03-04-2008, 06:15 PM

Was that tested on my set up

iamboon · 03-09-2008, 10:32 AM

LHT Performance finished Subie FMIC

http://www.tamparacing.com/forums/su...-new-fmic.html

MrLHT · 03-09-2008, 08:36 PM

I'm glad your happy with the set up, Paul and I spent some extra time making it perfect and everything fit 100%.

04-25-2007, 01:35 PM	#1 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Location: Tampa Fl TRader Rating: (7) : 13273247	We build Intercooler piping ( Aluminum) We can custom build your intercooler piping , We use Aluminum piping bead rolled, 4 ply silicone connectors and heavy duty stainless clamps the will not blow off. Single turbo, twin turbo with merge joints, You name it.We can build it. We can build 2.5" 2.75" and 3". Satin, Polished and powder coated Here's some samples: Last edited by MrLHT : 11-25-2007 at 11:07 PM.

11-25-2007, 11:21 PM	#5 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Location: Tampa Fl TRader Rating: (7) : 13273247	Here's another sample, we also sell Precision intercoolers. ON the above picture, notice the support tab on the intercooler. This takes the stess off the connectors for reliablity and long service. Last edited by MrLHT : 11-25-2007 at 11:23 PM.

03-04-2008, 06:15 PM	#13 (permalink)
iamboon Registered User Car: 05 Legacy GT, GT30R LHT Performance FMIC, IPT Race Tranny/TQ My TRGarage Location: New Port Richey, FL TRader Rating: (1) : 46	Was that tested on my set up Last edited by iamboon : 03-10-2008 at 01:57 PM.

10-09-2007, 10:01 AM	#2 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Location: Tampa Fl TRader Rating: (7) : 13273247	We can also weld you pipes, mark them how you want them then bring em down. Stainless and aluminum.

10-23-2007, 08:28 AM	#3 (permalink)
SRT4beepo Registered User Car: Dodge SRT4 My TRGarage Location: Florida TRader Rating: (-1) : 2480954	how much would it cost??

11-05-2007, 12:24 PM	#4 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Location: Tampa Fl TRader Rating: (7) : 13273247	Complete pipe kits with with intake + silicone connectors and clamps etc are $500 and up.

11-25-2007, 11:25 PM	#6 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Location: Tampa Fl TRader Rating: (7) : 13273247	Make your appointemnt today for LHT to build you pipe kit. You can piece your own turbo kit together and have LHT build the intercooler piping. We have a fast turn around time, and build it right the first time!

11-27-2007, 09:33 PM	#7 (permalink)
Crab Cakes So Lost! Car: Turbo Ek My TRGarage Location: Lost In Florida TRader Rating: (48) : 941178	how much for full 3inch piping and my precision 750hp core mounted lmk -George

11-28-2007, 08:22 AM	#8 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Location: Tampa Fl TRader Rating: (7) : 13273247	PM'ed sent

01-09-2008, 08:57 AM	#9 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Location: Tampa Fl TRader Rating: (7) : 13273247	This is a complete intercooler piping we built for a K20 integra. The K20 was installed then brought to us for the intercooler piping and intercooler. We modified a precision 600 intercooler and used all aluminum piping with 4 ply silicone connectors in black. All the piping is bead rolled to prevent pipes poping off and braces to the pipes don't rub against anything. This is a brushed finish, we can polish or powder coat and anodize the intercooler for a stealth look. The finished product.

01-24-2008, 05:38 PM	#10 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Location: Tampa Fl TRader Rating: (7) : 13273247	K20 Turbo in EG hatch. All piping is aluminum and bead rolled, Notice the support to prevent the pipes rubbing against each other

01-24-2008, 09:59 PM	#11 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Location: Tampa Fl TRader Rating: (7) : 13273247	We use Aluminum only on our intercooler piping, It's not only less than 1/4 the weight of steel or stainless it helps disaplate the heat like the intercooler itself. Call LHT today for your intercooler piping on any vehicle.

03-04-2008, 04:03 PM	#12 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Location: Tampa Fl TRader Rating: (7) : 13273247	Here's a complete LHT intercooler and pipe kit with 90 psi. You get what you pay for.

03-09-2008, 10:32 AM	#14 (permalink)
iamboon Registered User Car: 05 Legacy GT, GT30R LHT Performance FMIC, IPT Race Tranny/TQ My TRGarage Location: New Port Richey, FL TRader Rating: (1) : 46	LHT Performance finished Subie FMIC http://www.tamparacing.com/forums/su...-new-fmic.html

03-09-2008, 08:36 PM	#15 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Location: Tampa Fl TRader Rating: (7) : 13273247	I'm glad your happy with the set up, Paul and I spent some extra time making it perfect and everything fit 100%.