We build Intercooler piping ( Aluminum) - Page 2

MrLHT · 03-12-2008, 08:15 AM

Here's the pic's from the completed Legacy

The piping was built to allow the fog lights to stay

Even with the large 3.5" thick intercooler , very little bumper trimming was needed.

iamboon · 03-12-2008, 09:26 PM

car is so much quicker with the new FMIC set up!

plus I love raising the hood!

Thanks John and Paul!

MrLHT · 03-21-2008, 08:40 AM

This is a Volvo S60 R , It's trubo charged from the factory with an very thin intercooler mounted between the AC condensor and the radiator.It also used very small plastic intercooler hoses.
We removed the intercooler and mounted the condensor to the radiator ( Like an Acura integra) then used a larger air to air intercooler in front of them both.
We anodized the intercooler black so it's hiden but does not hurt the cooling efficiancey or chip like paint.

The intercooler mounted, The factory fog lights were retained.

The 2.5" aluminum piping bead rolled with flow sensor. Our pipes have been tested to 90psi so don't worry about poping off LHT pipes.

The bumper was trimmed very little to clear the larger core.

chet · 04-07-2008, 01:06 AM

john, what'd you think of the volvo s60R?

i've always liked the way they looked...just wondered if they were that much fun to drive.

MrLHT · 04-07-2008, 08:56 PM

We don't drive customers cars unless we're tuning them. I have no idea how they drive either, They do look cool though.

BoostFed95 · 04-12-2008, 07:54 PM

Hey John...could you give me a price for a 2.5" piping setup for a 95 civic coupe w/ a Tial 50mm flange? I tried calling you guys on Friday but noone answered

PM me please and i will give you my phone number. Thanks a lot!

MrLHT · 05-21-2008, 12:20 AM

A complete piping kit with clamps, silicone connectors , intake and filter is around $550 .

mariusITR · 06-06-2008, 10:46 AM

I have 2001 Acura Integra Type-R, I purchased the Turbo kit (T3/T04) last year and I'm not happy with the charge piping. Your phoenix Type-R caught my eye in the Turbo Magazine, the way the piping is routed is just flawless. Would you be able to build me the same piping set-up including the intake and it does't have to be carbon fiber, aluminum intake is fine with me. My problem is, if that would lined up with my existing Revhard exhaust manifold and revhard intercooler? Please advise......and how much it would cost me, thank you.

MrLHT · 06-23-2008, 09:19 PM

No Problem, Give us a call and set an appointment.

MrLHT · 07-31-2008, 09:43 AM

Aluminum intercooler piping custom built for anything, Import and domestic

Builing a turbo kit from scratch - Call us for your piping.

03-21-2008, 08:40 AM	#18 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Tampa Fl : 130813146	This is a Volvo S60 R , It's trubo charged from the factory with an very thin intercooler mounted between the AC condensor and the radiator.It also used very small plastic intercooler hoses. We removed the intercooler and mounted the condensor to the radiator ( Like an Acura integra) then used a larger air to air intercooler in front of them both. We anodized the intercooler black so it's hiden but does not hurt the cooling efficiancey or chip like paint. The intercooler mounted, The factory fog lights were retained. The 2.5" aluminum piping bead rolled with flow sensor. Our pipes have been tested to 90psi so don't worry about poping off LHT pipes. The bumper was trimmed very little to clear the larger core. Last edited by MrLHT : 03-21-2008 at 08:42 AM.

03-12-2008, 08:15 AM	#16 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Tampa Fl : 130813146	Here's the pic's from the completed Legacy The piping was built to allow the fog lights to stay Even with the large 3.5" thick intercooler , very little bumper trimming was needed.

03-12-2008, 09:26 PM	#17 (permalink)
iamboon Registered User Car: 05 Legacy GT, GT30R LHT Performance FMIC, IPT Race Tranny/TQ My TRGarage New Port Richey, FL : 46	car is so much quicker with the new FMIC set up! plus I love raising the hood! Thanks John and Paul!

04-07-2008, 01:06 AM	#19 (permalink)
chet All Aboard Car: 1989 Dodge Colt My TRGarage st petersburg, fla. : 98973793	john, what'd you think of the volvo s60R? i've always liked the way they looked...just wondered if they were that much fun to drive.

04-07-2008, 08:56 PM	#20 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Tampa Fl : 130813146	We don't drive customers cars unless we're tuning them. I have no idea how they drive either, They do look cool though.

04-12-2008, 07:54 PM	#21 (permalink)
BoostFed95 Registered User Car: My TRGarage : 180	Hey John...could you give me a price for a 2.5" piping setup for a 95 civic coupe w/ a Tial 50mm flange? I tried calling you guys on Friday but noone answered PM me please and i will give you my phone number. Thanks a lot!

05-21-2008, 12:20 AM	#22 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Tampa Fl : 130813146	A complete piping kit with clamps, silicone connectors , intake and filter is around $550 .

06-23-2008, 09:19 PM	#24 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Tampa Fl : 130813146	No Problem, Give us a call and set an appointment.

07-31-2008, 09:43 AM	#25 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Tampa Fl : 130813146	Aluminum intercooler piping custom built for anything, Import and domestic Builing a turbo kit from scratch - Call us for your piping.