We build Intercooler piping ( Aluminum)

[MrLHT]

Here's the pic's from the completed Legacy





The piping was built to allow the fog lights to stay

Even with the large 3.5" thick intercooler , very little bumper trimming was needed.

[iamboon]

car is so much quicker with the new FMIC set up!

plus I love raising the hood!

Thanks John and Paul!

[MrLHT]

This is a Volvo S60 R , It's trubo charged from the factory with an very thin intercooler mounted between the AC condensor and the radiator.It also used very small plastic intercooler hoses.
We removed the intercooler and mounted the condensor to the radiator ( Like an Acura integra) then used a larger air to air intercooler in front of them both.
We anodized the intercooler black so it's hiden but does not hurt the cooling efficiancey or chip like paint.



The intercooler mounted, The factory fog lights were retained.


The 2.5" aluminum piping bead rolled with flow sensor. Our pipes have been tested to 90psi so don't worry about poping off LHT pipes.




The bumper was trimmed very little to clear the larger core.

[chet]

john, what'd you think of the volvo s60R?

i've always liked the way they looked...just wondered if they were that much fun to drive.

[MrLHT]

We don't drive customers cars unless we're tuning them. I have no idea how they drive either, They do look cool though.

[BoostFed95]

Hey John...could you give me a price for a 2.5" piping setup for a 95 civic coupe w/ a Tial 50mm flange? I tried calling you guys on Friday but noone answered PM me please and i will give you my phone number. Thanks a lot!