K20 with LHT400 Turbo -Step by Step - Page 5

MrLHT · 01-16-2007, 07:50 PM

Thanks Taylor.

Well below is a shot of the piping installed for the last time, The over flow tank has a custom bracket to postion it in the right spot and looks very clean.
The thottle cable bracket is modified and a GSR thottle cable is used.

All the Misc wiring has to be cleaned up and secured. There is still little things left to do, but it's starting to come together.

MrLHT · 01-19-2007, 07:32 PM

OK, The vehicle is pretty much ready to go.
After a few little problems , IAC valve stuck open at 2200 rpms . We found out this happens on the k series, It's warrantied from our Engine supplyer so no worries.
We built a catch can and a breather can seen in the pics. We also cleaned up some of the wiring and hoses which will show on the before and after pics.
To finish of the whole package we supplied the customer with a JDM valve cover and spark plug cover. This is at no charge to the customer , we feel this was the only thing missing to make this look at it's best.We take great pride in our work and love what we do, I hope it shows in the finished product.
The dyno will be up next week.

Thanks for looking everyone.

This the catch can routed between the block vent and the intake manifold

This is the valve cover breather.

The day it came ( Before)

After:
K20 LHT Turbo ,Auto to manual with some magic LHT Touch.

2g · 01-19-2007, 07:37 PM

Whoa... amazing work. Awesome fabbing!

MugenR · 01-19-2007, 07:40 PM

that is some good stuff right there. well done!

clean teg · 01-19-2007, 08:54 PM

wow thats all i can say

me · 01-19-2007, 09:02 PM

Nice Work

InsaneCivicCoupe · 01-19-2007, 09:19 PM

looks like shit!!!! you guys should just close up shop....

jfwy... looks awesome!!! great work guys!!!

**Alpha** · 01-19-2007, 09:37 PM

I wouldnt expect anything less from you all

hondamike504 · 01-19-2007, 10:25 PM

you guys ROCK

little jon · 01-19-2007, 10:33 PM

Wow The Swap Came Out Nice!!! Hey John You Guys Did A B20 Turbo On My Boy Little Mike's Red Crx But Now He Has A Green One. Well We Both Work At Autoway Honda. I Want To Turbo My 94 Si. Can U Pm Me When Ur On So We Can Talk About Working On My Car?

CIVICJDW · 01-20-2007, 08:31 AM

Fantastic work. It looks like it came off the Honda assembly line like that.

KARLJACOB777 · 01-20-2007, 12:04 PM

John, Are You Sure Your Not German?

Fantastic Work!!!!!!!!!!!!!!!!!!!!!!!

Ha, No. English, born and bred.

Thanks for all the comments guys.

condells08 · 01-20-2007, 09:10 PM

I WANT THIS!!! damn ...amazing

UpInYa · 01-21-2007, 12:58 AM

ru selling this one?whos driving it

stealth cl · 01-21-2007, 01:36 AM

what would you guys charge for installation of a turbo kit, on an existing Kseries?

01-20-2007, 12:04 PM	#72 (permalink)
KARLJACOB777 1BADBLACKSI Car: 1993 HONDA CIVIC SI My TRGarage Location: ST PETE TRader Rating: (1) : 1968	John, Are You Sure Your Not German? Fantastic Work!!!!!!!!!!!!!!!!!!!!!!! Ha, No. English, born and bred. Thanks for all the comments guys. Last edited by MrLHT : 01-20-2007 at 08:38 PM.

01-16-2007, 07:50 PM	#61 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Location: Tampa Fl TRader Rating: (7) : 13273247	Thanks Taylor. Well below is a shot of the piping installed for the last time, The over flow tank has a custom bracket to postion it in the right spot and looks very clean. The thottle cable bracket is modified and a GSR thottle cable is used. All the Misc wiring has to be cleaned up and secured. There is still little things left to do, but it's starting to come together.

01-19-2007, 07:32 PM	#62 (permalink)
MrLHT John @ LHT Performance Car: Integra Type R TURBO My TRGarage Location: Tampa Fl TRader Rating: (7) : 13273247	OK, The vehicle is pretty much ready to go. After a few little problems , IAC valve stuck open at 2200 rpms . We found out this happens on the k series, It's warrantied from our Engine supplyer so no worries. We built a catch can and a breather can seen in the pics. We also cleaned up some of the wiring and hoses which will show on the before and after pics. To finish of the whole package we supplied the customer with a JDM valve cover and spark plug cover. This is at no charge to the customer , we feel this was the only thing missing to make this look at it's best.We take great pride in our work and love what we do, I hope it shows in the finished product. The dyno will be up next week. Thanks for looking everyone. This the catch can routed between the block vent and the intake manifold This is the valve cover breather. The day it came ( Before) After: K20 LHT Turbo ,Auto to manual with some magic LHT Touch.

01-19-2007, 07:37 PM	#63 (permalink)
2g Registered User Car: My TRGarage TRader Rating: (8) : 2906	Whoa... amazing work. Awesome fabbing!

01-19-2007, 07:40 PM	#64 (permalink)
MugenR Registered User Car: 2008 S2000 CR My TRGarage Location: seminole TRader Rating: (5) : 56291885	that is some good stuff right there. well done!

01-19-2007, 08:54 PM	#65 (permalink)
clean teg silver dc-2 Car: acura teggy My TRGarage Location: the hill TRader Rating: (5) : 69002712	wow thats all i can say

01-19-2007, 09:02 PM	#66 (permalink)
me Registered User Car: 99 Civic EX My TRGarage Location: Lutz / LOL TRader Rating: (16) : 18930528	Nice Work

01-19-2007, 09:19 PM	#67 (permalink)
InsaneCivicCoupe RACING INTEGRATION Car: Couple of em... My TRGarage Location: Bustin asses at the Hard Rock... TRader Rating: (12) : 2091221	looks like shit!!!! you guys should just close up shop.... jfwy... looks awesome!!! great work guys!!!

01-19-2007, 09:37 PM	#68 (permalink)
Alpha Moderator Car: EG Hatchback My TRGarage Location: Florida TRader Rating: (12) : 6211983	I wouldnt expect anything less from you all

01-19-2007, 10:25 PM	#69 (permalink)
hondamike504 HONDAMIKE.COM Car: changes from day2day My TRGarage Location: N.O.L.A. TRader Rating: (40) : 55638778	you guys ROCK

01-19-2007, 10:33 PM	#70 (permalink)
little jon Registered User Car: 05 civic ex SE & 07 R6 My TRGarage Location: clearwater TRader Rating: (8) : 1536948	Wow The Swap Came Out Nice!!! Hey John You Guys Did A B20 Turbo On My Boy Little Mike's Red Crx But Now He Has A Green One. Well We Both Work At Autoway Honda. I Want To Turbo My 94 Si. Can U Pm Me When Ur On So We Can Talk About Working On My Car?

01-21-2007, 12:58 AM	#74 (permalink)
UpInYa Marijuana my anti-drug Car: DC4 Ls-T My TRGarage Location: Carrolwood,FL TRader Rating: (17) : 152533910	ru selling this one?whos driving it

01-20-2007, 08:31 AM	#71 (permalink)
CIVICJDW Registered User Car: lots of em My TRGarage Location: Florida TRader Rating: (0) : 10	Fantastic work. It looks like it came off the Honda assembly line like that.

01-20-2007, 09:10 PM	#73 (permalink)
condells08 HP does not = IQ# Car: 00 eclipse, 88 teggy, 95 maxima, 99 se limited maxima My TRGarage Location: PC TRader Rating: (5) : 69581915	I WANT THIS!!! damn ...amazing

01-21-2007, 01:36 AM	#75 (permalink)
stealth cl Registered User Car: none My TRGarage Location: trust nobody TRader Rating: (3) : 10584727	what would you guys charge for installation of a turbo kit, on an existing Kseries?