Build and Dyno: Toyota Supra
Registered User
Thread Starter
Join Date: Jul 2002
Posts: 9,270
Likes: 0
Received 0 Likes
on
0 Posts
Build and Dyno: Toyota Supra
Thanks to Denny, Victor, Fernando, Mike and Alpha for getting this car finished and back to South Carolina.
Car: Toyota Supra
Motor: 2JZ-GTE
Fuel: Pump 93
Mods: Stock engine, ATI crank pulley, GSC S1 cams, Greddy 3-row intercooler, TiAL 50mm blowoff valve, Greddy exhaust manifold, Garrett GT4202 turbo, Fluidyne Radiator, 4" downpipe and exhaust and Haltech PS2000 EMS tuned by Alpha
Notes: We originally tuned the car with stock camshafts. It made 524whp on another dyno at 21lbs. This customer purchased the car from the previous owner. Had us install GSC S1 camshafts per our recommendation. Boost pressure was 19lbs. Clutch and/or dyno may have slipped during the pull.
Car: Toyota Supra
Motor: 2JZ-GTE
Fuel: Pump 93
Mods: Stock engine, ATI crank pulley, GSC S1 cams, Greddy 3-row intercooler, TiAL 50mm blowoff valve, Greddy exhaust manifold, Garrett GT4202 turbo, Fluidyne Radiator, 4" downpipe and exhaust and Haltech PS2000 EMS tuned by Alpha
Notes: We originally tuned the car with stock camshafts. It made 524whp on another dyno at 21lbs. This customer purchased the car from the previous owner. Had us install GSC S1 camshafts per our recommendation. Boost pressure was 19lbs. Clutch and/or dyno may have slipped during the pull.
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
Last edited by Alpha; 03-02-2011 at 08:39 PM.
Thread
Thread Starter
Forum
Replies
Last Post
