need help axle problem

gatewayjoe · 11-22-2009, 02:59 PM

i just did a h22 swap in my accord my passger sid axle keep sliding out i put a brand new one in when doing the swap so what could it be

DC2_BoostKING · 11-22-2009, 03:05 PM

it's not going in all the way. hit it wit ha BAH!

**custom240sx** · 11-22-2009, 03:13 PM

Or a BFH

gatewayjoe · 11-22-2009, 03:28 PM

so i cant be the tranmission then

**custom240sx** · 11-22-2009, 03:57 PM

I guess it could possibly be but I have never seen it actually be the tranny. Most of the time the c clip thing on the axle doesn't get completely seated in the tranny therefor not locking the axle in. Get it in as far as you can push it then line up the axle to be completely straight. Next you will push on the end of the axle compressing it as much as possible...while doing this a friend will smack the tip of the axle that goes through the hub with a hammer. After a few good hits you should feel it clip into the tranny. Put the nut on the end of the axle before you hit it with the hammer so you can protect the threads.

gatewayjoe · 11-22-2009, 05:13 PM

because it was in 2 times i get on it hard turning back and forth popping the clucth to see if it falls out and it does not its when i am taking it easy just falls out u can hear it free spinning could the clip brake

**custom240sx** · 11-22-2009, 05:16 PM

Maybe the splines are stripped inside the tranny...when the axle is out check inside the tranny and see what condition the splines are in.

gatewayjoe · 11-22-2009, 07:11 PM

are splines fixable

gatewayjoe · 11-22-2009, 07:13 PM

and how do u cheack the splines

gatewayjoe · 11-23-2009, 07:44 PM

man took it out today everthing looks good got to put it back in on thruesday day

diamond101 · 11-25-2009, 01:08 PM

possiable you have the wrong axle.....

00vtecsi · 11-26-2009, 04:31 AM

worn diff, see how much play the axle has (up, down) when installed, the tube is probably worn in the diff and the axle keeps poping out...

**chi town brat** · 11-26-2009, 10:40 AM

Moved to the correct forum for tech help.

chi town brat
S Mod

11-22-2009, 02:59 PM	#1 (permalink)
gatewayjoe Registered User Car: My TRGarage : 3153090	need help axle problem i just did a h22 swap in my accord my passger sid axle keep sliding out i put a brand new one in when doing the swap so what could it be

11-22-2009, 03:05 PM	#2 (permalink)
DC2_BoostKING EATRICE Car: Honda Integra RS My TRGarage About 2 miles ahead of you still pulling... : 72470342	it's not going in all the way. hit it wit ha BAH!

11-22-2009, 03:13 PM	#3 (permalink)
custom240sx DC Crew Member #1 Car: 1994 DC, 1990 EF My TRGarage Hernando : 439848952	Or a BFH

11-22-2009, 03:28 PM	#4 (permalink)
gatewayjoe Registered User Car: My TRGarage : 3153090	so i cant be the tranmission then

11-22-2009, 03:57 PM	#5 (permalink)
custom240sx DC Crew Member #1 Car: 1994 DC, 1990 EF My TRGarage Hernando : 439848952	I guess it could possibly be but I have never seen it actually be the tranny. Most of the time the c clip thing on the axle doesn't get completely seated in the tranny therefor not locking the axle in. Get it in as far as you can push it then line up the axle to be completely straight. Next you will push on the end of the axle compressing it as much as possible...while doing this a friend will smack the tip of the axle that goes through the hub with a hammer. After a few good hits you should feel it clip into the tranny. Put the nut on the end of the axle before you hit it with the hammer so you can protect the threads.

11-22-2009, 05:13 PM	#6 (permalink)
gatewayjoe Registered User Car: My TRGarage : 3153090	because it was in 2 times i get on it hard turning back and forth popping the clucth to see if it falls out and it does not its when i am taking it easy just falls out u can hear it free spinning could the clip brake

11-22-2009, 05:16 PM	#7 (permalink)
custom240sx DC Crew Member #1 Car: 1994 DC, 1990 EF My TRGarage Hernando : 439848952	Maybe the splines are stripped inside the tranny...when the axle is out check inside the tranny and see what condition the splines are in.

11-22-2009, 07:11 PM	#8 (permalink)
gatewayjoe Registered User Car: My TRGarage : 3153090	are splines fixable

11-22-2009, 07:13 PM	#9 (permalink)
gatewayjoe Registered User Car: My TRGarage : 3153090	and how do u cheack the splines

11-23-2009, 07:44 PM	#10 (permalink)
gatewayjoe Registered User Car: My TRGarage : 3153090	man took it out today everthing looks good got to put it back in on thruesday day

11-25-2009, 01:08 PM	#11 (permalink)
diamond101 Registered User Car: My TRGarage : 11078086	possiable you have the wrong axle.....

11-26-2009, 10:40 AM	#13 (permalink)
chi town brat ! Ne shab'rud'ni ! Car: JC (91) Li'l 1 (90) & Bratz Toy (92) All Civic All Hatches My TRGarage Heaven & Hell : 993674748	Moved to the correct forum for tech help. chi town brat S Mod

11-26-2009, 04:31 AM	#12 (permalink)
00vtecsi slow ass car Car: ITR converted 94 teggy My TRGarage Central, Florida : 4882092	worn diff, see how much play the axle has (up, down) when installed, the tube is probably worn in the diff and the axle keeps poping out...