1000hp integra build

manifoldmike · 04-09-2008, 08:52 PM

so the 700 hp integra build turned into the 1000hp integra build a couple weeks after we finished the car thanks to ryan.

we had some set back with the engine, so were going to take care of that and get the build going. we had to already switch out the rods (5/16 bolt eagles) for some beefyer ones, so its not that big of a deal.

the engine is out of the car (thanks jon) and waiting for our in house builder to get his hands on it (antonio).

things we going to be throwing on there:

beefy rods (can get eagles with 3/8 bolts, but might get somthing else)
borg warner s372 race cover .100 a/r back side
second stage of 1600 cc injectors
second fuel system (regulator, pump, lines, fuel cell)
twin disk clutch
beefy axles
new paint

maybes:

front face bottom mount manifold
re-routed 4" downpipe
1000hp air to water intercooler setup with honda half core heat transfer.
cage

this is going to be some fun stuff so keep your eyes peeled.

i'll post up some pics of the turbo, car and engine in the next couple days.

*if anyone is looking for a direct bolt on kit that has proven power numbers (480whp@12psi, 630whp@18psi) with about 1000miles on it we are selling his old kit for $4000 obo. this includes: 4to1 top mount manifold, t67 turbo (.70 a/r compressor, .96 a/r hot side, p-trim turbine, water cooled, 4" welded v-band), 4" downpipe with 4" e-cutout (3" v-band to rest of exhaust), turbosmart 48mm wastegate (with all springs), 2" dump tube that dump under engine, 2.5" hot side and 3" cold side polished intercooler pinping, precsion intercooler 24x12x3 high density cast end tanks, turbosmart raceport bov, stainless -3an feed line and -10an drain line, black couplers, t-bolt clamps and 4" polished cold air intake with aem dry filter.

** does not allow power steering or a/c

current setup:

jacari215 · 04-09-2008, 10:25 PM

man dude to bad the bottom of that downpipe does look like that any more! can we say not to let other people borrow your car! lol FTW

noh22forme · 04-09-2008, 11:04 PM

o. m. g.

awesome. that engine is bad ass.

K24_ELEMENT · 04-09-2008, 11:36 PM

mines faster.
haha yea right. this is sick tho
rep'd for sure

SCP_Celica · 04-13-2008, 10:51 AM

holy crap thats crazy.

diceman469 · 04-13-2008, 12:28 PM

WTF....this is the setup that made me come to DC, and already bored with it?

Someone must be making a killing in the stock market to do this kind of work over and over again. $4k is crazy cheap, even if you have to spend another $2k to copy that oil pan

manifoldmike · 04-14-2008, 08:40 AM

Quote:

Originally Posted by diceman469

WTF....this is the setup that made me come to DC, and already bored with it?

Someone must be making a killing in the stock market to do this kind of work over and over again. $4k is crazy cheap, even if you have to spend another $2k to copy that oil pan

DC also wants to get this project going. we are going to be helping a little bit to make this project a reality.

diceman469 · 04-14-2008, 03:11 PM

Quote:

Originally Posted by manifoldmike

DC also wants to get this project going. we are going to be helping a little bit to make this project a reality.

Oh yea? Well I'm moving out of state in July....so I'll be expecting some gifts from you guys...lol

But seriously...I'm going on another trip for a few weeks in June...I'm definately bringing the car to you guys to finish what we spoke about and maybe a few more things

I'm having way too much fun to give up the car while I'm still in sunny florida to enjoy it! [/threadjack]

hombredelassrtas · 04-18-2008, 10:03 AM

holy crap. some awsome work right there

Saturntuner05 · 04-19-2008, 09:32 PM

I guess Ryan is gonna have to invest in to DEPENDS. LOL!

uyht · 04-20-2008, 10:51 PM

no doubt. just got back from reno, gonna try and come by tuesday to see the crew.

bori bori · 04-27-2008, 01:37 PM

more pics

Saturntuner05 · 04-29-2008, 09:42 PM

Quote:

Originally Posted by uyht

no doubt. just got back from reno, gonna try and come by tuesday to see the crew.

*cough* No Ryan...

Bump need more pictars. Or maybe how the car sits right now would be cool Mike.

uyht · 04-30-2008, 07:05 PM

yea yea some of us work for a living.....

I will be there on saterday unless I die or something.

Saturntuner05 · 04-30-2008, 11:56 PM

Quote:

Originally Posted by uyht

yea yea some of us work for a living.....

I will be there on saterday unless I die or something.

I know Im just Joshin ya. Hey I do this stuff for a living.

God I love my job!

04-09-2008, 08:52 PM	#1 (permalink)
manifoldmike Registered User Car: My TRGarage : 72489999	1000hp integra build so the 700 hp integra build turned into the 1000hp integra build a couple weeks after we finished the car thanks to ryan. we had some set back with the engine, so were going to take care of that and get the build going. we had to already switch out the rods (5/16 bolt eagles) for some beefyer ones, so its not that big of a deal. the engine is out of the car (thanks jon) and waiting for our in house builder to get his hands on it (antonio). things we going to be throwing on there: beefy rods (can get eagles with 3/8 bolts, but might get somthing else) borg warner s372 race cover .100 a/r back side second stage of 1600 cc injectors second fuel system (regulator, pump, lines, fuel cell) twin disk clutch beefy axles new paint maybes: front face bottom mount manifold re-routed 4" downpipe 1000hp air to water intercooler setup with honda half core heat transfer. cage this is going to be some fun stuff so keep your eyes peeled. i'll post up some pics of the turbo, car and engine in the next couple days. if anyone is looking for a direct bolt on kit that has proven power numbers (480whp@12psi, 630whp@18psi) with about 1000miles on it we are selling his old kit for $4000 obo. this includes: 4to1 top mount manifold, t67 turbo (.70 a/r compressor, .96 a/r hot side, p-trim turbine, water cooled, 4" welded v-band), 4" downpipe with 4" e-cutout (3" v-band to rest of exhaust), turbosmart 48mm wastegate (with all springs), 2" dump tube that dump under engine, 2.5" hot side and 3" cold side polished intercooler pinping, precsion intercooler 24x12x3 high density cast end tanks, turbosmart raceport bov, stainless -3an feed line and -10an drain line, black couplers, t-bolt clamps and 4" polished cold air intake with aem dry filter. * does not allow power steering or a/c current setup: Last edited by manifoldmike : 04-09-2008 at 09:06 PM.

04-09-2008, 10:25 PM	#2 (permalink)
jacari215 Registered User Car: My TRGarage : 232920	man dude to bad the bottom of that downpipe does look like that any more! can we say not to let other people borrow your car! lol FTW

04-09-2008, 11:04 PM	#3 (permalink)
noh22forme Banned Car: honda prelude My TRGarage tampa : 172625111	o. m. g. awesome. that engine is bad ass.

04-09-2008, 11:36 PM	#4 (permalink)
K24_ELEMENT Registered User Car: My TRGarage : 87720394	mines faster. haha yea right. this is sick tho rep'd for sure

04-13-2008, 10:51 AM	#5 (permalink)
SCP_Celica 04 Celica - 220whp Car: My TRGarage : 274139335	holy crap thats crazy.

04-13-2008, 12:28 PM	#6 (permalink)
diceman469 Registered User Car: My TRGarage : 127913292	WTF....this is the setup that made me come to DC, and already bored with it? Someone must be making a killing in the stock market to do this kind of work over and over again. $4k is crazy cheap, even if you have to spend another $2k to copy that oil pan

04-18-2008, 10:03 AM	#9 (permalink)
hombredelassrtas Carbon Fiber Connoisseur Car: Toyota Celica GT-S My TRGarage Tampa : 185663200	holy crap. some awsome work right there

04-19-2008, 09:32 PM	#10 (permalink)
Saturntuner05 Addicted to Boost... Car: 98 SC2/92 SC2 On PSI/ 07 Busa/02 SV650S My TRGarage St.Petersburg : 31714911	I guess Ryan is gonna have to invest in to DEPENDS. LOL!

04-20-2008, 10:51 PM	#11 (permalink)
uyht Registered User Car: 95 teggy and 2006 GTI My TRGarage Lakeland : 28343174	no doubt. just got back from reno, gonna try and come by tuesday to see the crew.

04-27-2008, 01:37 PM	#12 (permalink)
bori bori stays on his grind Car: 98 honda civic hatchback My TRGarage Tampa : 24839052	more pics

04-30-2008, 07:05 PM	#14 (permalink)
uyht Registered User Car: 95 teggy and 2006 GTI My TRGarage Lakeland : 28343174	yea yea some of us work for a living..... I will be there on saterday unless I die or something.