rb20det swap

[q8tkd]

i have a 95 s14, and am getting an rb20 engine .. can you give me an average of how much will it cost me if i do the swap at ur shop ?.. ill bring the engine and transmission

[q8tkd]

.........?

[JDMbyBlood]

Will get back with you Monday when Im at the shop. Do you have the Wire harness & ECU?

[Kirk]

Originally Posted by JDMbyBlood

Will get back with you Monday when Im at the shop. Do you have the Wire harness & ECU?

You will need:
ECU
Wiring Harness
Electric fans
Custom throttle cable bracket
Tach adapter or gauge cluster

The rest is direct bolt in.

[q8tkd]

i dont have any of these just the engine and transmission .. so with that can you give me an estimate for the swap.

[back2Nissan]

what about motor mounts??

Originally Posted by Kirk

You will need:
ECU
Wiring Harness
Electric fans
Custom throttle cable bracket
Tach adapter or gauge cluster

The rest is direct bolt in.

[q8tkd]

this is what i have rb20 Complete Motor Complete Head & Block
Distributor, Intake Manifold Exhaust Manifold, Alternator Power Steering Pump Fuel Rail, Injectors Throttle Body, Turbo, 5 Speed Transmission.
how much will it cost me if i bring that with the car for a swap?

[Kirk]

Originally Posted by back2Nissan

what about motor mounts??

Either that or a R32 cross member

[McLovin']

Originally Posted by q8tkd

this is what i have rb20 Complete Motor Complete Head & Block
Distributor, Intake Manifold Exhaust Manifold, Alternator Power Steering Pump Fuel Rail, Injectors Throttle Body, Turbo, 5 Speed Transmission.
how much will it cost me if i bring that with the car for a swap?

well, I don't work there, but what they are saying is as it is, you do not have enough parts to get it into the car. You'll ATLEAST need to buy a mount kit or R32 x-member to get it to sit in there. To get it in and have it RUN, youll need what you have + ECU, Harness and the other stuff that Kirk listed. Good luck

[q8tkd]

will the engine mounts from mckinneymotorsports.com work? or recommend me some places to get them at a lower price

[Shadytrixta1]

I would say ebay an R32 crossmember or find an engine importer who might part with one.Mckinney is kinda pricey in my eyes.

[SpottedMango]

We will for sure hit you up on Monday when we get in!

[McLovin']

mckinney v. r32 x-member...

Mckinney Motorsports
+Much easier to get yout hands on (from what I have seen)
+Some find it easier to put a mount kit in than a x-member

Cross Member
+Price
+There are some baller turbo setups that can be found, most of the ones from Japan wil NOT work w/ the mount kit, but usually do with the crossmember

[back2Nissan]

Originally Posted by bad97BLAZER

mckinney v. r32 x-member...

Mckinney Motorsports
+Much easier to get yout hands on (from what I have seen)
+Some find it easier to put a mount kit in than a x-member

Cross Member
+Price
+There are some baller turbo setups that can be found, most of the ones from Japan wil NOT work w/ the mount kit, but usually do with the crossmember

And.... If you dont have the factory engine mounts attached to your engine, than you will also have to locate those to use the sub-frame. Mckinney Mounts +1 from someone who had one of the first sets made. Awesome fit and built much stronger than the competition.

[q8tkd]

so any estimates? i think i can get the R32 cross member from ebay