where is the damn door dinger on a 1999 neon

rollin420a · 01-23-2008, 02:40 PM

where is the damn door dinger at so i can snip the wires its pissin me off

**Dano Moparo** · 01-23-2008, 04:17 PM

The seat belt reminder system uses both visual and audible signals. A combined seat belt and key reminder chime with a red light on the instrument panel.
The system will always illuminate the seat belt reminder lamp for four to eight seconds when the ignition switch is turned to the ON position. The CHIME will sound during the same time interval if the driver's seat belt is not fastened. Passenger belts are not connected to the system. The chime will activate if the drivers door is opened and:

The key is in the ignition switch, with the ignition switch in either the OFF or accessory (ACC) position
The head lamps are ON.

The chime is part of the instrument cluster

CLUSTER WIRING - HARNESS CONNECTORS

J1 CONNECTOR J2 CONNECTOR PIN DESCRIPTION PIN DESCRIPTION 1 DOOR AJAR 1 OIL PRESSURE 2 HI BEAM 2 ABS 3 RIGHT TURN 3 MIL * (SERVICE ENGINE SOON) 4 SEAT BELT 4 ENGINE TEMPERATURE 5 IGNITION FEED 5 KEY IN / HEADLAMPS ON 6 BATTERY 6 BRAKE 7 TACHOMETER SIGNAL 7 CHARGING SYSTEM 8 GROUND 8 LEFT TURN 9 AIRBAG 9 ILLUMINATION 10 SPEED SIGNAL 10 FUEL LEVEL

rollin420a · 01-23-2008, 04:40 PM

thank you for tht but i just took the pin out on the door jamb and disconnected it much better no headache and i still have dome lamp

01-23-2008, 02:40 PM	#1 (permalink)
rollin420a 727 Car: dodge neon 2.0l dohc My TRGarage H-town : 10	where is the damn door dinger on a 1999 neon where is the damn door dinger at so i can snip the wires its pissin me off

01-23-2008, 04:17 PM	#2 (permalink)
Dano Moparo Grandpa Car: 1970 Dodge Challenger RT 2005 Hemi Chrysler 300C 1999 GMC Sierra My TRGarage Pinellas Park : 10915645	The seat belt reminder system uses both visual and audible signals. A combined seat belt and key reminder chime with a red light on the instrument panel. The system will always illuminate the seat belt reminder lamp for four to eight seconds when the ignition switch is turned to the ON position. The CHIME will sound during the same time interval if the driver's seat belt is not fastened. Passenger belts are not connected to the system. The chime will activate if the drivers door is opened and: The key is in the ignition switch, with the ignition switch in either the OFF or accessory (ACC) position The head lamps are ON. *The chime is part of the instrument cluster* CLUSTER WIRING - HARNESS CONNECTORS J1 CONNECTOR J2 CONNECTOR PIN DESCRIPTION PIN DESCRIPTION 1 DOOR AJAR 1 OIL PRESSURE 2 HI BEAM 2 ABS 3 RIGHT TURN 3 MIL * (SERVICE ENGINE SOON) 4 SEAT BELT 4 ENGINE TEMPERATURE 5 IGNITION FEED 5 KEY IN / HEADLAMPS ON 6 BATTERY 6 BRAKE 7 TACHOMETER SIGNAL 7 CHARGING SYSTEM 8 GROUND 8 LEFT TURN 9 AIRBAG 9 ILLUMINATION 10 SPEED SIGNAL 10 FUEL LEVEL

01-23-2008, 04:40 PM	#3 (permalink)
rollin420a 727 Car: dodge neon 2.0l dohc My TRGarage H-town : 10	thank you for tht but i just took the pin out on the door jamb and disconnected it much better no headache and i still have dome lamp