Mod. Pefromance turbo kits?

[.Seth.]

Hahn Racecraft Turbo systems for 1995-1999 Dodge / Plymouth Neons

ok so i was looking at this turbo kit for a little down the road and it looks like its got basicly everything i'd need to do it, anyone see anything missing
Super 16g Mitsubishi turbo
(This turbo is highly known in the DSM communities for its efficiency, and fast spool up times and reliability.) Cast Stainless Steel Exhaust Manifold
Ceramic coated, mandrel bent 2 1/4 Down Pipe
Single pipe, stepped design from 2" to 2 1/4"air piping.
Standard, OE 3000 GT Blow off valve
Fuel pressure gauge for tuning of system
Fuel pump
regulator
hoses
fittings
lines
electronic mods
K&N w/ mandrel bent piping

thats exactly wat it has on the page.

anything missing other than IC?

[ozzy1]

injectors and something to tune

[Josiah]

the RRFPR tunes....and I'm pretty sure hahn kits come with injectors...call them and find out

[.Seth.]

well i didnt see anything missing so i was jus seeing if u guys did

[Ahhhh Nick!]

Fuel pump, injectors, something to tune with, rrfpr... I have a SRT-4 intercooler I can sell you also.

[.Seth.]

well if and when i get it, ill get stage 2 and i have injectors and a fuel pump, and it comes w/ a IC w/ stage 2

[.Seth.]

and there is a fuel pump lol

[Ahhhh Nick!]

Why not just do the SRT turbo? Dirt cheap setup right there!

[.Seth.]

was thinkin about it but this isent jus gunna be a 1 step thing it will be from turbo to built motor to bigger turbo to even bigger turbo and the srt mani will only hold the srt turbo

[Ahhhh Nick!]

Well the srt turbo and mani are one peice but once you get your entire srt turbo setup on your car you'll be inlove with it. When you get used to that power you can just get another manifold and a different turbo and that's it. Just a quick/inexpensive way to go turbo.

[.Seth.]

very true

[neondriver]

if you have the money go for the hann kit, you can do the srt kit for around 1,200(ive pieced it together in the past) but if you want to go bigger and bigger youll end up replacing mos of the parts with better ones and in the end you may spend more than the hann kit is alone. trust me i pieced together a full turbo kit and if you have time and knowledge its possible but still a pain an takes a while. its much easier to just buy the kit which has everything included

[.Seth.]

yeah i was planning on saving the money i would ussually spend on moding the motor and saving it then whne i get enough buy the whole kit and be done w/ it

[neondriver]

Originally Posted by Usuck!

yeah i was planning on saving the money i would ussually spend on moding the motor and saving it then whne i get enough buy the whole kit and be done w/ it

that would be the best way, plus the hann kit is made specific for the car and when installed it is clean and not a bunch of used pieced together parts to make due. ive heard hann is good quality and there are many neons running that kit out there.

[.Seth.]

Originally Posted by neondriver

that would be the best way, plus the hann kit is made specific for the car and when installed it is clean and not a bunch of used pieced together parts to make due. ive heard hann is good quality and there are many neons running that kit out there.

well most the stuff modern. perf. sells in high quality from what i can see, but now alls i need is the 3.5k lol