cammed Srt4's?

efficientkiller · 10-27-2005, 05:00 PM

just curious to know if anyone in the Bay Area is running cams in their Srt4 yet or is planning to run them....im interested in getting Crane 0012's, but wanted some input first...thanks

Skittle · 10-27-2005, 05:31 PM

Havent heard of anyone besides Ernie.

Josiah · 10-27-2005, 07:29 PM

well, I have 2.0L cams if that counts...used to have some crane#14s as well, but didnt think they were really worth the money

efficientkiller · 10-27-2005, 07:40 PM

i dont think he ever got it to run how he wanted it with the cams installed...I know the Crane 0012's cams are perfect for the stock turbo set up w/ mild mods...they allow quicker spool, and very strong midrange to high range from 2,000 to redline....

efficientkiller · 10-27-2005, 07:45 PM

aren't the Crane 14's to aggressive for the stock turbo setup though?...12's are a little milder...

**Jap** · 10-27-2005, 10:53 PM

I want a Darrel Cox stage 3 head if that counts . I actually had it ordered untill I got a couple street racing tickets that I had to pay ...

If anyone has 2k lyin around its probally the most power producing after intial mods other than a larger turbo ...

I think well over 360WHP/400WTQ could be made on a stock turbo + bolt ons and the DC3 head ...

Josiah · 10-28-2005, 08:09 AM

well, with the 2.4 I was using I had a built bottom end and revved to 7k, so they were perfect...but again, not worth $400, I am expecting roughly the same performance out of my 2.0L cams for the SRT engine

SpringHillSRT-4 · 10-28-2005, 11:28 AM

im waiting for crane to officially release the cams for the srt at the begining of the new year. get back to be then and ill let you know how they are.

efficientkiller · 10-28-2005, 11:29 AM

thanks for the input...

ACR2NV · 10-31-2005, 01:18 AM

last i checked ernie's were crower custom ground ones....

10-27-2005, 05:00 PM	#1 (permalink)
efficientkiller Nurburgring Special Car: GTi VR6 My TRGarage International : 535	cammed Srt4's? just curious to know if anyone in the Bay Area is running cams in their Srt4 yet or is planning to run them....im interested in getting Crane 0012's, but wanted some input first...thanks

10-27-2005, 07:40 PM	#4 (permalink)
efficientkiller Nurburgring Special Car: GTi VR6 My TRGarage International : 535	i dont think he ever got it to run how he wanted it with the cams installed...I know the Crane 0012's cams are perfect for the stock turbo set up w/ mild mods...they allow quicker spool, and very strong midrange to high range from 2,000 to redline.... Last edited by efficientkiller : 10-27-2005 at 08:37 PM.

10-28-2005, 11:29 AM	#9 (permalink)
efficientkiller Nurburgring Special Car: GTi VR6 My TRGarage International : 535	thanks for the input... Last edited by efficientkiller : 10-28-2005 at 02:34 PM.

10-27-2005, 05:31 PM	#2 (permalink)
Skittle Got Toys? Car: 99 Yukon,92 KX 125,96' Banshee,240sx/ls1(one day it will be done).. My TRGarage Tampa : 2147483647	Havent heard of anyone besides Ernie.

10-27-2005, 07:29 PM	#3 (permalink)
Josiah Peon on steroids! Car: 97 Dodge neon coupe(built SRT engine when I have the time) '66 mustang coupe(restomod project) My TRGarage Franklin, TN : 100	well, I have 2.0L cams if that counts...used to have some crane#14s as well, but didnt think they were really worth the money

10-27-2005, 07:45 PM	#5 (permalink)
efficientkiller Nurburgring Special Car: GTi VR6 My TRGarage International : 535	aren't the Crane 14's to aggressive for the stock turbo setup though?...12's are a little milder...

10-27-2005, 10:53 PM	#6 (permalink)
Jap The Racer Car: 91 Integra DB1 My TRGarage Tampa , Fl : 2147483647	I want a Darrel Cox stage 3 head if that counts . I actually had it ordered untill I got a couple street racing tickets that I had to pay ... If anyone has 2k lyin around its probally the most power producing after intial mods other than a larger turbo ... I think well over 360WHP/400WTQ could be made on a stock turbo + bolt ons and the DC3 head ...

10-28-2005, 08:09 AM	#7 (permalink)
Josiah Peon on steroids! Car: 97 Dodge neon coupe(built SRT engine when I have the time) '66 mustang coupe(restomod project) My TRGarage Franklin, TN : 100	well, with the 2.4 I was using I had a built bottom end and revved to 7k, so they were perfect...but again, not worth $400, I am expecting roughly the same performance out of my 2.0L cams for the SRT engine

10-28-2005, 11:28 AM	#8 (permalink)
SpringHillSRT-4 Registered User Car: My TRGarage : 554018	im waiting for crane to officially release the cams for the srt at the begining of the new year. get back to be then and ill let you know how they are.

10-31-2005, 01:18 AM	#10 (permalink)
ACR2NV a.k.a. NeonDan Car: Neons.... My TRGarage CFL : 521	last i checked ernie's were crower custom ground ones....