83 Dodge Challenger

SmokinS13SR20 · 08-22-2005, 07:09 PM

yea guys i know its not SRT-4 but how cares? this car has sentimental value and if you cant understand that well o-well. But i was wondering if anyoner knows anything good or bad about this car. it has been in my family its whole life it was my grandma's (who now drives a supra heh, go grandma) then my dad and now me, if anyone knows anything about this car that would be helpful please chime in thanks alot guys.

allibabba · 08-23-2005, 08:59 AM

It's a RWD Mitsubishi, correct?. The Plymouth version was called a Saporo. I only remember that when the carb needed rebuilt, I could not get over the price. I think I went with a Webber instead. The one I had was red over silver.

**Dano Moparo** · 08-23-2005, 10:55 AM

good luck finding parts for it. I think its easier to get parts for my 70. In their day they were pretty reliable cars compared to what else was out there, I never had many calls for parts on them. It was just the price of the parts at the time is what people hated about them. When it broke, it was expensive.

Fast420A · 08-23-2005, 01:54 PM

This may help, Find the Haynes Manual I have seen pics of it on the internet. I think the part number is 30012

SmokinS13SR20 · 08-23-2005, 10:33 PM

well i have the chilton manual and which is much better than the haynes might i sneak in there. before i had to find some bushings for the shifter and i had to call about 8 different places and then had it special ordered so yea it was more but thats ok. like i said htis car has alot of sentimental value. o.0 and yes it is a RWD 2.6L mitsubishi motor. i just cant find anything for the motor as in performance i can only find stock cams and those are really any good use and torsion bars *stock* and some accel coils but once again not much use. any ideas to find something for the performance side of this rare car?

o.0 and yes it is easier to find more parts for your 70 cause its more popular i have never seen another 83 on the road so that says alot

Josiah · 08-24-2005, 10:54 AM

cant find performance for the motor...2 options...A. make your own stuff, a real PITA or B.swap the motor...if I am not mistaken I hear people who swap to a 2.0L 4g63 in Conquests and Starions...that type of thing, the 2.4L Chrysler engine may also bolt up depending on the bolt pattern for your motor(a friend of mine is checking to see if the bolt pattern is the same) even if it doesnt though all you would really need to do is make an adapter plate and the aftermarket options for both motors are pretty extensive at this point(more so for the 4g63, but the 2.4L is picking up with the debut of the SRT4)

SmokinS13SR20 · 08-24-2005, 01:04 PM

lol yea i agree but it would be hard to make my own stuff lol like yea it would be hard to make a camshaft lol so yea i dunno i have found some STOCK cams from discount auto parts lol anyone else?

~-~Joe

Josiah · 08-25-2005, 10:56 AM

yeah, it would be difficult...at the very least you would need a late and some serious skills...but you could always contact crower or crane cams, sent them some stock cams to regrind at least to a more aggresive profile, but seriously consider the engine swap...even if you cant get a 2.4L to bolt to your tranny you can always use the RWD tranny from a Jeep Liberty...which will bolt to a 2.4....after all, custom cams are probably going to run you about $250 or more for one cam, but as far as custom making your own stuff, I was talking more like headers, etc...you might also want to try allpar.com and see if they have anything or any useful links

SmokinS13SR20 · 08-27-2005, 01:17 AM

ok thanks man ill check out allpar.com and $250 for a cam aint to bad considering i only need one... lol

SmokinS13SR20 · 08-27-2005, 01:31 AM

-{Quote from Allpar.com}-
The Challenger disappeared shortly after its power vanished, its name to be used by a Mitsubishi import.

yo josiah know any websites for mitsu that are like allpar.com or something around those terms thanks for any help anybody

Josiah · 08-28-2005, 08:27 PM

if your 2.6 is the same version used in the starion...you may find info here....http://www.mitsubishi-forums.com/

RWD4G63 · 02-01-2008, 11:06 AM

I actually have a 1981 Dodge Challenger powered by a 4G63. Its been at the DSM Shootout in Ohio the last few years. I used the motor mounts used to swap a 4G63 into a starion. I am using Buschur racings Turbo350 auto trans adapter plate, and I had a 8.8 rear from a mustang welded in. I originaly had a 5spd in it, I just modified the stock bell housing to bolt to a 4G63 and had ACT make me a custom clutch. To my knowlege its the only Challenger/Sapporo with a 4G63 but i'd love to see if there were any others out there.

ozzy1 · 02-01-2008, 11:25 AM

^^^ damn you went searching thru old posts

SmokinS13SR20 · 02-03-2008, 04:16 AM

Yea he did, cars bene gone for quite some time.

08-22-2005, 07:09 PM	#1 (permalink)
SmokinS13SR20 Fucking has no Cougar... Car: 99 Solara SLE-S My TRGarage Here, then there... : 182111356	83 Dodge Challenger yea guys i know its not SRT-4 but how cares? this car has sentimental value and if you cant understand that well o-well. But i was wondering if anyoner knows anything good or bad about this car. it has been in my family its whole life it was my grandma's (who now drives a supra heh, go grandma) then my dad and now me, if anyone knows anything about this car that would be helpful please chime in thanks alot guys.

08-23-2005, 08:59 AM	#2 (permalink)
allibabba Registered User Car: My TRGarage : 1342	It's a RWD Mitsubishi, correct?. The Plymouth version was called a Saporo. I only remember that when the carb needed rebuilt, I could not get over the price. I think I went with a Webber instead. The one I had was red over silver.

08-23-2005, 10:55 AM	#3 (permalink)
Dano Moparo Grandpa Car: 1970 Dodge Challenger RT 2005 Hemi Chrysler 300C 1999 GMC Sierra My TRGarage Pinellas Park : 10915645	good luck finding parts for it. I think its easier to get parts for my 70. In their day they were pretty reliable cars compared to what else was out there, I never had many calls for parts on them. It was just the price of the parts at the time is what people hated about them. When it broke, it was expensive.

08-23-2005, 01:54 PM	#4 (permalink)
Fast420A It's a Family Car Officer Car: '04 Red Skittle and '00 Red Grand Cherokee My TRGarage Tampa : 882030	This may help, Find the Haynes Manual I have seen pics of it on the internet. I think the part number is 30012

08-23-2005, 10:33 PM	#5 (permalink)
SmokinS13SR20 Fucking has no Cougar... Car: 99 Solara SLE-S My TRGarage Here, then there... : 182111356	well i have the chilton manual and which is much better than the haynes might i sneak in there. before i had to find some bushings for the shifter and i had to call about 8 different places and then had it special ordered so yea it was more but thats ok. like i said htis car has alot of sentimental value. o.0 and yes it is a RWD 2.6L mitsubishi motor. i just cant find anything for the motor as in performance i can only find stock cams and those are really any good use and torsion bars stock and some accel coils but once again not much use. any ideas to find something for the performance side of this rare car? o.0 and yes it is easier to find more parts for your 70 cause its more popular i have never seen another 83 on the road so that says alot

08-24-2005, 10:54 AM	#6 (permalink)
Josiah Peon on steroids! Car: 97 Dodge neon coupe(built SRT engine when I have the time) '66 mustang coupe(restomod project) My TRGarage Franklin, TN : 100	cant find performance for the motor...2 options...A. make your own stuff, a real PITA or B.swap the motor...if I am not mistaken I hear people who swap to a 2.0L 4g63 in Conquests and Starions...that type of thing, the 2.4L Chrysler engine may also bolt up depending on the bolt pattern for your motor(a friend of mine is checking to see if the bolt pattern is the same) even if it doesnt though all you would really need to do is make an adapter plate and the aftermarket options for both motors are pretty extensive at this point(more so for the 4g63, but the 2.4L is picking up with the debut of the SRT4)

08-24-2005, 01:04 PM	#7 (permalink)
SmokinS13SR20 Fucking has no Cougar... Car: 99 Solara SLE-S My TRGarage Here, then there... : 182111356	lol yea i agree but it would be hard to make my own stuff lol like yea it would be hard to make a camshaft lol so yea i dunno i have found some STOCK cams from discount auto parts lol anyone else? ~-~Joe

08-25-2005, 10:56 AM	#8 (permalink)
Josiah Peon on steroids! Car: 97 Dodge neon coupe(built SRT engine when I have the time) '66 mustang coupe(restomod project) My TRGarage Franklin, TN : 100	yeah, it would be difficult...at the very least you would need a late and some serious skills...but you could always contact crower or crane cams, sent them some stock cams to regrind at least to a more aggresive profile, but seriously consider the engine swap...even if you cant get a 2.4L to bolt to your tranny you can always use the RWD tranny from a Jeep Liberty...which will bolt to a 2.4....after all, custom cams are probably going to run you about $250 or more for one cam, but as far as custom making your own stuff, I was talking more like headers, etc...you might also want to try allpar.com and see if they have anything or any useful links

08-27-2005, 01:17 AM	#9 (permalink)
SmokinS13SR20 Fucking has no Cougar... Car: 99 Solara SLE-S My TRGarage Here, then there... : 182111356	ok thanks man ill check out allpar.com and $250 for a cam aint to bad considering i only need one... lol

08-27-2005, 01:31 AM	#10 (permalink)
SmokinS13SR20 Fucking has no Cougar... Car: 99 Solara SLE-S My TRGarage Here, then there... : 182111356	-{Quote from Allpar.com}- The Challenger disappeared shortly after its power vanished, its name to be used by a Mitsubishi import. yo josiah know any websites for mitsu that are like allpar.com or something around those terms thanks for any help anybody

08-28-2005, 08:27 PM	#11 (permalink)
Josiah Peon on steroids! Car: 97 Dodge neon coupe(built SRT engine when I have the time) '66 mustang coupe(restomod project) My TRGarage Franklin, TN : 100	if your 2.6 is the same version used in the starion...you may find info here....http://www.mitsubishi-forums.com/

02-01-2008, 11:06 AM	#12 (permalink)
RWD4G63 Registered User Car: My TRGarage : 10	I actually have a 1981 Dodge Challenger powered by a 4G63. Its been at the DSM Shootout in Ohio the last few years. I used the motor mounts used to swap a 4G63 into a starion. I am using Buschur racings Turbo350 auto trans adapter plate, and I had a 8.8 rear from a mustang welded in. I originaly had a 5spd in it, I just modified the stock bell housing to bolt to a 4G63 and had ACT make me a custom clutch. To my knowlege its the only Challenger/Sapporo with a 4G63 but i'd love to see if there were any others out there.

02-01-2008, 11:25 AM	#13 (permalink)
ozzy1 likes minute rice Car: it's american with jdm sekretz My TRGarage : 927312409	^^^ damn you went searching thru old posts

02-03-2008, 04:16 AM	#14 (permalink)
SmokinS13SR20 Fucking has no Cougar... Car: 99 Solara SLE-S My TRGarage Here, then there... : 182111356	Yea he did, cars bene gone for quite some time.