SRT IC measurements....

mpbiv · 07-26-2003, 03:11 PM

Who's got them? Need total length, height, and depth of the whole unit.

**Jordan Y.** · 07-26-2003, 10:41 PM

Yes, it's nice that factory cars are coming with front mounts these days. Now it's just a matter of time 'till they start showing up in junkyards to benefit the older and less fortunate

.

mpbiv · 07-27-2003, 09:04 AM

Yeah except I don't plan to wait until they hit the junkyards........

**Clint** · 07-27-2003, 01:47 PM

I cant find anything online about them yet, and i'm sur they wont have any laying around in the parts dept yet.. :/

07-27-2003, 02:08 PM

Core is 24" wide 7" high and about 2.75" thick

**cali** · 07-27-2003, 03:38 PM

Quote:

Originally posted by Billy
Core is 24" wide 7" high and about 2.75" thick

I wonder how Billy knows this?
I think its closer to 3in thick though

mpbiv · 07-27-2003, 04:18 PM

They may not stock them at the dealer but you can order them through them, already seen one put into a daytona. Thanks Billy, but maybe I should have been more specific when I said total length. I need the length of the whole unit including the endtanks.

Wondering if it would fit between my headlights in the grill opening.

**cali** · 07-27-2003, 07:07 PM

Well add about 5 in on each side for end tanks.
BTW:
Have u heard the dealer price on parts for this thing?
hood is 2K+
Rubber hose on the hot side is $250! ( 2ft rubber hose)
RIM is $330

:o :o

07-28-2003, 01:04 AM

I know thats what you were wanting, but that is all the info I could muster up.

mpbiv · 07-28-2003, 04:12 PM

I heard the intercooler is in the ~500 range and the turbo/manifold assembly is in the 500-600 range. Not sure though. For 550 I could easily get a high flow spearco IC from FWDPerformance.

**cali** · 07-28-2003, 06:35 PM

turbo/manifold at dealer is ~1200...I knwo cuz the assholes changed mine under warranty...dumb asses

mpbiv · 07-28-2003, 08:35 PM

They must have hiked the prices quite a bit then because I remember even Gary Donovan (Relentless Performance), was selling a few of them when the cars were just out and they were half that price. The turbo/manifold was being touted around by all the old school turbododgers as a cheap unit for anyone doing a 2.4 DOHC retrofit. Guess thats not the case anymore.

**cali** · 07-28-2003, 09:16 PM

You are correct. I know of a few who bought complete manifolds(turbo included) for the cheap price back in Feb/March.

mpbiv · 07-28-2003, 10:39 PM

http://www.villagephotos.com/pubbrow...elected=394939

Pics of a Daytona with one installed.

**Clint** · 07-29-2003, 01:25 AM

schweet!

07-26-2003, 03:11 PM	#1 (permalink)
mpbiv Rod Bearing Eater Car: Eats Rod Bearings My TRGarage Orlando Area : 27	SRT IC measurements.... Who's got them? Need total length, height, and depth of the whole unit.

07-26-2003, 10:41 PM	#2 (permalink)
Jordan Y. 15 seconds EXHILARATION Car: 1991 Nissan 240SX Coupe My TRGarage Temple Terrace/USF : 301961453	Yes, it's nice that factory cars are coming with front mounts these days. Now it's just a matter of time 'till they start showing up in junkyards to benefit the older and less fortunate .

07-27-2003, 09:04 AM	#3 (permalink)
mpbiv Rod Bearing Eater Car: Eats Rod Bearings My TRGarage Orlando Area : 27	Yeah except I don't plan to wait until they hit the junkyards........

07-27-2003, 01:47 PM	#4 (permalink)
Clint keyboard hardass Car: My TRGarage : 5127198	I cant find anything online about them yet, and i'm sur they wont have any laying around in the parts dept yet.. :/

07-27-2003, 02:08 PM	#5 (permalink)
Billy Guest Car: My TRGarage	Core is 24" wide 7" high and about 2.75" thick

07-27-2003, 04:18 PM	#7 (permalink)
mpbiv Rod Bearing Eater Car: Eats Rod Bearings My TRGarage Orlando Area : 27	They may not stock them at the dealer but you can order them through them, already seen one put into a daytona. Thanks Billy, but maybe I should have been more specific when I said total length. I need the length of the whole unit including the endtanks. Wondering if it would fit between my headlights in the grill opening.

07-27-2003, 07:07 PM	#8 (permalink)
cali Skittle on crack! Car: My TRGarage Somewhere : 15280620	Well add about 5 in on each side for end tanks. BTW: Have u heard the dealer price on parts for this thing? hood is 2K+ Rubber hose on the hot side is $250! ( 2ft rubber hose) RIM is $330 :o :o

07-28-2003, 01:04 AM	#9 (permalink)
Billy Guest Car: My TRGarage	I know thats what you were wanting, but that is all the info I could muster up.

07-28-2003, 04:12 PM	#10 (permalink)
mpbiv Rod Bearing Eater Car: Eats Rod Bearings My TRGarage Orlando Area : 27	I heard the intercooler is in the ~500 range and the turbo/manifold assembly is in the 500-600 range. Not sure though. For 550 I could easily get a high flow spearco IC from FWDPerformance.

07-28-2003, 06:35 PM	#11 (permalink)
cali Skittle on crack! Car: My TRGarage Somewhere : 15280620	turbo/manifold at dealer is ~1200...I knwo cuz the assholes changed mine under warranty...dumb asses

07-28-2003, 08:35 PM	#12 (permalink)
mpbiv Rod Bearing Eater Car: Eats Rod Bearings My TRGarage Orlando Area : 27	They must have hiked the prices quite a bit then because I remember even Gary Donovan (Relentless Performance), was selling a few of them when the cars were just out and they were half that price. The turbo/manifold was being touted around by all the old school turbododgers as a cheap unit for anyone doing a 2.4 DOHC retrofit. Guess thats not the case anymore.

07-28-2003, 09:16 PM	#13 (permalink)
cali Skittle on crack! Car: My TRGarage Somewhere : 15280620	You are correct. I know of a few who bought complete manifolds(turbo included) for the cheap price back in Feb/March.

07-28-2003, 10:39 PM	#14 (permalink)
mpbiv Rod Bearing Eater Car: Eats Rod Bearings My TRGarage Orlando Area : 27	http://www.villagephotos.com/pubbrow...elected=394939 Pics of a Daytona with one installed.

07-29-2003, 01:25 AM	#15 (permalink)
Clint keyboard hardass Car: My TRGarage : 5127198	schweet!