+ Reply to Thread
Results 1 to 15 of 15
Thread: Fs/Ft: 438whp Eg
-
11-01-2009 07:51 PM #1
Fs/Ft: 438whp Eg
This is my pride and joy but its time to let her go I recently lost my job and money is really tight right now. I'm really looking for money but trades are also welcome.
Engine:
B18a1 block
Oem crank lighten 5lbs
Titanium eagle rods
Acl race series bearings
Jun oil pump
Wiseco 9:2:1 compression pistons
(The pistons were nitride coated along with the rings)
81.5 mm bore
The block has been decked as miniumum as possible
eagle block guard
arp main bolts
morosso 5.5 qts oil pan
all of the machining on the block has been done by inline four in california
B16 head
This head has received Portflows extreme porting and valve job
(I have all of the receipts for the head from portflow in cali)
ferrea valves std size
bronze valve guides
supertech dual valve springs
supertech titanium retainers
brand new lifters installed with a brand new lost motion assembly
Toda spec B cams
Toda Cam gears
Greddy timing belt
Vibrant belt tensioner
(everything in this motor has been balanced and blueprinted with in grams)
Other:
Act prolite flywheel
act extreme pressure plate
act extreme clutch disk
Victor X manifold
Skunk 2 70mm throttle body
Aem fuel rail
Aeromotive fpr
Morosso catch can
Custom 10 an fittings
Jdm Gsr tranny with oem LSD
Turbo kit:
Sfp custom manifold
Custom 3inch down pipe with Vband
3inch exhaust with vband flange under the car
Greddy axle back
1 week old Precission Sc50 60mm inlet with .63 a.r
Greddy Fmic with custom piping
Hks ssq BOV
walbro 255
aem boost control
apexi turbo timer
Interior:
I'm not sure if the seats are real or not but supposely they are mugen
the interior is mint and very clean.
sparco 4pt harness
In dash tv
Skunk 2 rear strut bar
Suspension:
Kyb gr2 shocks all the way around
Urathane bushings all the way around the car
brand new tie rods and balljoints
Eibach lowering springs
Rims:
Black Slipstreams with brand new tires
The bads:
The car has 2 minor dents in the top near the door where the paint was scraped off
who ever gets will need a retune with bigger injectors to get the full potetial.
The motor mounts where brand new but this motor just shatters them.
Solid Mounts are a must.
By the way this motor only has 2,375 miles on it.
(The car was tuned a month ago with 1000cc injectors
and a p28 ecu the car made 438 whp and 311lbs of torque
at 15psi but somebody broked into my house and stoled the
injectors along with the ecu and my carbon fiber hood and bumper.
The car is riding right now with dsm 390cc and a street tune cause
of the lack of money. The hood and the bumper thats on the car now
is the same color of the car but the car was painted 6 months ago and
there for you can notice the difference from the hood and the bumper
towards the rest of the car.)
I can go on and on about what I have done to the car if you have any
questions you can call me at 813 562 1138. I have well over $15,000
invested in this car and I have every single receipt for everything in
this car I know I will never get what i invested. Like I said trades are
welcome. My asking price is $8,200obo. You can pm me or you can call me.
And to who ever buys this car I will give them a brand new TWM 52mm ITB's which are worth over $1,600 for free.
Com' on guys need this gone NEW PRICE $8,200 oboLast edited by 01LatinVizionGSR; 11-15-2009 at 10:52 PM.
-
11-01-2009 08:27 PM #2
im still thinking about it its a hard choice for me to make lol
Hid Kits For Sale
Visit my Tr Shop Forum
813-297-9038 Izzy

-
11-01-2009 09:04 PM #3
I finally got the pics up bump if you view.
-
11-01-2009 09:50 PM #4
ttt
-
11-01-2009 10:03 PM #5
wow very nice. bump
'05 Kia Spectra5-now my fathers DD
'67 English Ford Cortina w/2.3 thunderbird turbo eng
...under construction
'99 ek...traded
'95 b16 eg hatch...traded
'92 DA...parted out
'89 CRX Si...traded
'93 Prelude Turbo...sold
'96 ek coupe...traded
'97 ek 4dr...sold
'96 Jeep Grand Cherokee
'98 Mustang GT
"You may get me off the line, but you know who daddy is!"
-
11-01-2009 10:25 PM #6MUSTANG NAZI!
- Join Date
- May 2008
- Posts
- 1,178
- Feedback Score
- 4 (100%)
bump for eduardo
OLD SCHOOL EF CREW MEMBER #100
-
11-02-2009 09:23 AM #7
come on guys lets see what out there.

-
11-02-2009 11:19 AM #8SINGLE CAM
- Join Date
- Jul 2008
- Posts
- 244
- Feedback Score
- 9 (100%)
Bumps For My Old Hatchy

-
11-02-2009 11:53 AM #9
bump for a sleeper.........
"Proven Power. Nuff Said" 
"God is Good"
-
11-02-2009 01:32 PM #10
-
11-02-2009 05:04 PM #11Wants ya Mooooney
- Join Date
- Dec 2006
- Location
- Nature Coast Ish
- Posts
- 161
- Feedback Score
- 3 (100%)
"The car was tuned a month ago with 1000cc injectors
and a p28 ecu the car made 438 whp and 311lbs of torque
at 15psi but somebody broked into my house and stoled the
injectors along with the ecu and my carbon fiber hood and bumper. "
so your saying they just broke into your house went to your car stole the injector's,computer, bumper and hood but left the car ?
-
11-02-2009 11:29 PM #12
First I take out the ecu everynight before I got to sleep thats one.
The injectors were taking out because I was installing the new aem fuel rail. The carbon fiber hood was still in the box it came with it was never even open. Somebody broked in the house stole my tv and ps3 and happen to see all this shit laying around and took it also. I even have dyno vids of the car getting tuned. but thank you for asking.
-
11-02-2009 11:32 PM #13
By the way the car is getting retuned on thursday on new injectors. So who ever buys will get it at full potential.

-
11-03-2009 10:35 AM #14SINGLE CAM
- Join Date
- Jul 2008
- Posts
- 244
- Feedback Score
- 9 (100%)
Bump Homie

-
11-03-2009 11:58 AM #15fullybuilteg
- Join Date
- Jun 2007
- Location
- bradenton flordia
- Posts
- 820
- Feedback Score
- 3 (80%)
hey man interested in those itbs....!!! you wanna sel those seperate.... call me 941 779 5817
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)



LinkBack URL
About LinkBacks
Reply With Quote
