Fs : Jbl Gto301.1 Ii
Fs : JBL GTO301.1 II amplifier
JBL GTO301.1 II
$125 OBO
CONTACT ME AT 727-768-1003
300-Watt Mono Amplifier
High-output MOSFET power supply ensures optimum power delivery into numerous impedances with low distortion. The GTO301.1 II features a 12dB per octave electronic crossover, allowing you to optimize bass performance based on cabin size, as well as subwoofer location and enclosure type.
RCA low-level inputs.
Full-range preamp outputs facilitate use of multiple amplifiers without the need for noisy and expensive adapters or signal splitters.
Optional remote level bass control available.
A variable bass boost circuit is provided to optimize system response.
Power Output
204 watts RMS x 1 channel at 4 ohms and ≤ 1% THD + N (BR>
294 watts RMS x 1 channel at 2 ohms,
14.4V supply and ≤ 1% THD + NSignal-to-Noise Ratio 77 dBA (reference 1 watt into 4 ohms)
Frequency Response
(-3dB)10Hz - 302Hz
Maximum Input Signal
4.7V
Maximum Sensitivity
220mV
Output Regulation
.098 dB at 4 ohms
Dimensions (H x W x D)
11-5/8" x 12-5/16" x 2-3/8"
(will include silver ends to bolt down)
$125 OBO
CONTACT ME AT 727-768-1003
300-Watt Mono Amplifier
High-output MOSFET power supply ensures optimum power delivery into numerous impedances with low distortion. The GTO301.1 II features a 12dB per octave electronic crossover, allowing you to optimize bass performance based on cabin size, as well as subwoofer location and enclosure type.
RCA low-level inputs.
Full-range preamp outputs facilitate use of multiple amplifiers without the need for noisy and expensive adapters or signal splitters.
Optional remote level bass control available.
A variable bass boost circuit is provided to optimize system response.
Power Output
204 watts RMS x 1 channel at 4 ohms and ≤ 1% THD + N (BR>
294 watts RMS x 1 channel at 2 ohms,
14.4V supply and ≤ 1% THD + NSignal-to-Noise Ratio 77 dBA (reference 1 watt into 4 ohms)
Frequency Response
(-3dB)10Hz - 302Hz
Maximum Input Signal
4.7V
Maximum Sensitivity
220mV
Output Regulation
.098 dB at 4 ohms
Dimensions (H x W x D)
11-5/8" x 12-5/16" x 2-3/8"
(will include silver ends to bolt down)
__________________
Last edited by JDM Paulk; 08-26-2009 at 08:53 AM.