speaker rings

[TJElite]

If you're looking to make fiberglass kick panels, door panels, woofer boxes, etc., you'll need speaker rings. With my new CNC, I can turn out custom rings, up to about 20" in diameter, in anything from 1/2 or 3/4 mdf to foam to plex to aluminum...

Sure, you can cut rings out of wood with a jigsaw, but with mine, you'll get a perfectly round part, with exactly the right size hole in the middle. I can also give you a recess for the speaker to sit in, as well as a recess around the outside to staple your fleece or grill cloth to. Yeah, you could do all that with a router table, or even a router, but its a big mess, a lot of work, and somewhat dangerous.

Cost will vary as to what you want, but figure around $10 for a pair of 5.25/6/6.5 rings out of 3/4 mdf.

I can also do teardrop baffles for seperates, square baffles for kickers, etc, as well as grills, emblems, and all sorts of other stuff.

Toby

[vdubindahs]

so can you make a custom box for like three 15 inch square l7s in the back of a vw golf?pm me please

[TBSpyder]

so can you make a custom box for like three 15 inch square l7s in the back of a vw golf?pm me please

How did we go from speaker rings to a full custom box for 3 15's?

[TJElite]

so can you make a custom box for like three 15 inch square l7s in the back of a vw golf?pm me please

I could, but I don't really want to...so it would be real expensive. I'm just selling the rings...

Toby

[USFBULL69]

is there any way you can do a 5x7/6x8 to 5.25 adapter plate? i would need two of them if you could? just let me know

[TJElite]

is there any way you can do a 5x7/6x8 to 5.25 adapter plate? i would need two of them if you could? just let me know

Yeah, I could make those...but what are you looking to do? If you are just looking to fit a 5.25 into a 6x8 hole, behind a door panel or something, they make molded plastic plates for that. Should be available at CC or BB. If not, I can get them, they'll run you about $10 for the pair.

SearchResults

If you need something fancier, like with a recessed speaker, or a thicker plate, etc., then I can make you something.

Toby

[KON97]

how much for a pair of rings 6-3/4x5-3/4 and another pair 6-3/4x5-5/8 my email is brianboyd89@yahoo.com