Kirk

Complete Fuel Injector Cleaning & Flow Testing

Process:

• Injectors bodies are cleaned, visual inspected, and numbered.
• Injector coils are now tested for resistance, shorts, and current draw.
• Perform leak test, spray pattern, and flow rate testing on our ASNU flow bench. Record the results.
• Remove filter baskets, o-rings, and pintle caps. Bead-blast any loose paint and rust from the metal injector body.
• The injectors are placed in our first ultrasonic cleaning tank to remove and any particles, dirt, etc for 5-10 minutes.
• Into a second ultrasonic tank they go, they are now cycled on and off allowing the ultrasonic energy to dislodge any particles and build-up inside the injectors for 15-20 minutes.
• A high pressure back-flush is done to remove any particles inside.
• Install new filter baskets, o-rings, and pintle caps. (as required)
• Back to the flow bench for retesting of spray pattern, flow rate, and leak checking. This test data is also recorded
• (If requested) Prepare a comprehensive test report with before and after test data.

Full Service (Ultrasonic Clean and Flow)

• Top Feed - $20.00/each
• Top Feed (Hose Fed) - $25.00/each
• Side Feed - $25.00/each
• Optimax w/ Air Injector - $35.00/each
• GM Vortec V6 "Spider" - $160.00/6 injectors
• GM Vortec V8 "Spider" - $190.00/8 injectors

Flow Only (no parts replaced)

• All Injectors - $10.00/each

Injector Parts Only

• DIY Injector Rebuild Kits starting at $20.00

We service injectors for the following applications:

* Outboard
* Marine (HPDI, Optimax, etc.)
* Automotive
* High Performance Automotive (Up to 4000cc injectors! No injector too big!)
* Motorcycles
* ATVs

This is the current list of side-feed injectors we can do:

• Rochester/Delphi (Volkswagen, GM TBI, etc.)
• Nippondenso (Jaguar, Chrysler 3.5, Ford, etc.)
• Bosch JECS (Nissan/Toyota) (
• JECS (Nissan/Subaru) (STI, Maxima, etc.)
• JECS (Toyota) (Supra, MR2, etc.)
• GM Vortec 4.3L (1992-1995)
• GM Vortec 4.3L and 5.7L CPI

Feel free to visit our website for more information regarding our fuel injector servicing. You may contact us at 813-443-0531 or at sales@theboostlab.com!