Skipped the 13s !!! Watchout 4sefed4 !!
Registered User
Thread Starter
Join Date: Jul 2000
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Hey everyone Great news!! I went to Test and Tune @ Desoto today. My previous best time was 14.04 @98 MPH. That was with all the original parts with 145000 miles on them. After the install of a K&N Walbro 307 fuel pump new timing chain Valve springs slicks open exhaust and my new SMC Alky Kit I went 12.85 @103 with a 1.79 60-foot time!! Im thrilled!!! This was at 19 PSI 26 Degrees advance and using 93 octane gas. I used straight Denatured Alcohol which worked perfect!! Later I raised the timing to 29 degrees and 22 psi and still had no knock. Lack of traction made the times the same but it felt a lot stronger. The car has the stock rear rubber bushings so when I launched harder than 5 psi the car went kinda sideways... Definitley a fun ride!! 11s Here I come!!!
------------------
BM Computer Source
http://www.bmcomputersource.com
Automotive Software for GM and others soon!
1987 Buick Grand National working to be an 11 second 1/4 mile AutoCrossing GN!
Moderator Scantool section of www.turbotransam.com
------------------
BM Computer Source
http://www.bmcomputersource.com
Automotive Software for GM and others soon!
1987 Buick Grand National working to be an 11 second 1/4 mile AutoCrossing GN!
Moderator Scantool section of www.turbotransam.com
__________________
BM Computer Source
http://www.bmcomputersource.com
Automotive Software for GM and others soon!
1987 Buick Grand National working to be an 11 second 1/4 mile AutoCrossing GN!
Moderator Scantool section of www.turbotransam.com
BM Computer Source
http://www.bmcomputersource.com
Automotive Software for GM and others soon!
1987 Buick Grand National working to be an 11 second 1/4 mile AutoCrossing GN!
Moderator Scantool section of www.turbotransam.com
4SFED4
Join Date: Aug 2000
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Thats Mr. 4SFED 
hehehehehhe
4SFED 4 will be ready very soon. But you had better get your trap speed up at least 10-15 mph if you wanna play. hehehehehehe. 4SFED 4 is a street killa!
Congrats on skipping the 13s. I agree they are a complete waste of time. Why mess with em?
------------------
Larry
2000 Nissan Maxima SE 5 speed Mad Max
14.38 @ 96.62 (2.13) - 203 hp/191 ft lb on Spec Rs Dynojet
1985 Dodge Omni GLH Turbo - 4SFED
Engine rebuild in progress....T minus 10 days until liftoff....A few weeks after that and 4SFED goes east to hunt whales!
hehehehehhe4SFED 4 will be ready very soon. But you had better get your trap speed up at least 10-15 mph if you wanna play. hehehehehehe. 4SFED 4 is a street killa!
Congrats on skipping the 13s. I agree they are a complete waste of time. Why mess with em?
------------------
Larry
2000 Nissan Maxima SE 5 speed Mad Max
14.38 @ 96.62 (2.13) - 203 hp/191 ft lb on Spec Rs Dynojet
1985 Dodge Omni GLH Turbo - 4SFED
Engine rebuild in progress....T minus 10 days until liftoff....A few weeks after that and 4SFED goes east to hunt whales!
__________________
Larry
2002 MB C320 Sport Wagon 15.4@91
2002 Dodge Neon SE
1991 Dodge Spirit R/T-12.3@117 (at 368 whp) Now 500 whp / 514 ft lb on pump gas
Larry
2002 MB C320 Sport Wagon 15.4@91
2002 Dodge Neon SE
1991 Dodge Spirit R/T-12.3@117 (at 368 whp) Now 500 whp / 514 ft lb on pump gas
Registered User
Join Date: Nov 2000
Posts: 459
Likes: 0
Received 0 Likes
on
0 Posts
Hey Bob was this you in this video?
Nice job of running away from me at the 1/8 mile if it was.
http://web.tampabay.rr.com/7seconds/13.5@96.MPG
Nice job of running away from me at the 1/8 mile if it was.
http://web.tampabay.rr.com/7seconds/13.5@96.MPG
4SFED4
Join Date: Aug 2000
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by "Someone"
Originally posted by TealTalon:
Hey Bob was this you in this video?
Nice job of running away from me at the 1/8 mile if it was.
http://web.tampabay.rr.com/7seconds/13.5@96.MPG
Originally posted by TealTalon:
Hey Bob was this you in this video?
Nice job of running away from me at the 1/8 mile if it was.
http://web.tampabay.rr.com/7seconds/13.5@96.MPG
------------------
Larry
2000 Nissan Maxima SE 5 speed Mad Max
14.38 @ 96.62 (2.13) - 203 hp/191 ft lb on Spec Rs Dynojet
1985 Dodge Omni GLH Turbo - 4SFED
Engine rebuild in progress....T minus 10 days until liftoff....A few weeks after that and 4SFED goes east to hunt whales!
__________________
Larry
2002 MB C320 Sport Wagon 15.4@91
2002 Dodge Neon SE
1991 Dodge Spirit R/T-12.3@117 (at 368 whp) Now 500 whp / 514 ft lb on pump gas
Larry
2002 MB C320 Sport Wagon 15.4@91
2002 Dodge Neon SE
1991 Dodge Spirit R/T-12.3@117 (at 368 whp) Now 500 whp / 514 ft lb on pump gas
Registered User
Join Date: Aug 2000
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Great time Bob!!! congrats. If youre gonna run 4SFED you better keep that 60 time down there hehehe or he will hunt you down in the last 1/8. The turbo dodges arent the greatest in the 1st 1/8 but watch out for the second!!! (traction on FWD is tough)... What was your 1/8 time and MPH if the slip shows??? Just curious.
Also Your time is dead on with a GNX I ran... 12.85 @ 104
Also Your time is dead on with a GNX I ran... 12.85 @ 104
__________________
Ken Adler
'87 GLHS #189 12.51 @ 111.85
'87 Shelby Charger(garnet)
'99 Grand Prix GTX 14.32 @ 95.86
Ken Adler
'87 GLHS #189 12.51 @ 111.85
'87 Shelby Charger(garnet)
'99 Grand Prix GTX 14.32 @ 95.86
Registered User
Join Date: Nov 2000
Posts: 459
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by "Someone"
Originally posted by 4sfed 4:
Who didnt run away from the TealTurd in the second 1/8th? Im pretty sure I saw a 1983 Ford Escort escorting you down the second 1/8......
Originally posted by 4sfed 4:
Who didnt run away from the TealTurd in the second 1/8th? Im pretty sure I saw a 1983 Ford Escort escorting you down the second 1/8......
Registered User
Thread Starter
Join Date: Jul 2000
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Thanks everyone! My 1/8 mile info is:
8.150 @83.99 MPH. Dont worry I havnt bolted on any performance parts yet!! Ive set a goal of $1500 total layout of money for me to get to the 11s. So far I have spent $300 of it on the Alky Kit. that was not necessary but it allows me to run high boost without race gas. The parts Ive put on the car have all been replacement of worn pieces like the timing chain valve springs and fuel pump.
------------------
BM Computer Source
http://www.bmcomputersource.com
Automotive Software for GM and others soon!
1987 Buick Grand National working to be an 11 second 1/4 mile AutoCrossing GN!
Moderator Scantool section of www.turbotransam.com
8.150 @83.99 MPH. Dont worry I havnt bolted on any performance parts yet!! Ive set a goal of $1500 total layout of money for me to get to the 11s. So far I have spent $300 of it on the Alky Kit. that was not necessary but it allows me to run high boost without race gas. The parts Ive put on the car have all been replacement of worn pieces like the timing chain valve springs and fuel pump.
------------------
BM Computer Source
http://www.bmcomputersource.com
Automotive Software for GM and others soon!
1987 Buick Grand National working to be an 11 second 1/4 mile AutoCrossing GN!
Moderator Scantool section of www.turbotransam.com
__________________
BM Computer Source
http://www.bmcomputersource.com
Automotive Software for GM and others soon!
1987 Buick Grand National working to be an 11 second 1/4 mile AutoCrossing GN!
Moderator Scantool section of www.turbotransam.com
BM Computer Source
http://www.bmcomputersource.com
Automotive Software for GM and others soon!
1987 Buick Grand National working to be an 11 second 1/4 mile AutoCrossing GN!
Moderator Scantool section of www.turbotransam.com
Registered User
Thread Starter
Join Date: Jul 2000
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
By the way that was not me in the video but a friend who was running lke 109-110 mph... He left you in the 1/8 because he was getting 2.1 60 foot times... I want 115 mph and an 11.60 et. Ill get there sooner or later!!
------------------
BM Computer Source
http://www.bmcomputersource.com
Automotive Software for GM and others soon!
1987 Buick Grand National working to be an 11 second 1/4 mile AutoCrossing GN!
Moderator Scantool section of www.turbotransam.com
------------------
BM Computer Source
http://www.bmcomputersource.com
Automotive Software for GM and others soon!
1987 Buick Grand National working to be an 11 second 1/4 mile AutoCrossing GN!
Moderator Scantool section of www.turbotransam.com
__________________
BM Computer Source
http://www.bmcomputersource.com
Automotive Software for GM and others soon!
1987 Buick Grand National working to be an 11 second 1/4 mile AutoCrossing GN!
Moderator Scantool section of www.turbotransam.com
BM Computer Source
http://www.bmcomputersource.com
Automotive Software for GM and others soon!
1987 Buick Grand National working to be an 11 second 1/4 mile AutoCrossing GN!
Moderator Scantool section of www.turbotransam.com
Registered User
Join Date: Oct 2000
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
haha great bob. i didnt get a chance to talk to u yesterday but as u can see i was sitting on the bleachers at the bottom of the end of that video! woohoo im on tv...err...internet video! woohoo
__________________
Nightshadow Blue 1993 Toyota Camry
Nightshadow Blue 1993 Toyota Camry
Registered User
Join Date: Jul 2000
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Congrats Bob. It was good to see the Buick guys out at the track. I had a blast and some good runs down the 1/4 also. I had the red LS1 Z28. Ill see you guys out there again soon.
jess
------------------
99 Z28 A4 3.23
Lid/FilterMAFMACs/ORcutout!tbMw3200
321rwhp/330rwtq The Sled
stock vs mods dyno
Time slip
jess
------------------
99 Z28 A4 3.23
Lid/FilterMAFMACs/ORcutout!tbMw3200
321rwhp/330rwtq The Sled
stock vs mods dyno
Time slip
__________________
99 Z28 A4 3.23
Lid/FilterMAFMACs/ORcutout!tbMw3200
321rwhp/330rwtq The Sled
stock vs mods dyno
Time slip
99 Z28 A4 3.23
Lid/FilterMAFMACs/ORcutout!tbMw3200
321rwhp/330rwtq The Sled
stock vs mods dyno
Time slip
