PDA

View Full Version : 13brew sp 3mm longblock w/tranny

danameisoj
09-21-2008, 08:04 PM
Ive got my longblock for sale. The motor is a 3mm motor with a streetport.
Its got low compression in the front rotor . The apex seals are still intact. The housing are fairly new. About 10k on the housings Motor still ran well, Just got pulled to freshen it up but I cant finish the car anymore.
Tranny shifts really smooth . Has a centerforce clutch in it . Has alot of life left.
Motor does not come with the turbos. Will come with stock computer.
Injectors and rails do come with it.
I am willing to ship at buyers expense.
1200obo..
Thanks
http://i129.photobucket.com/albums/p217/danameisoj/100_2875.jpg
http://i129.photobucket.com/albums/p217/danameisoj/100_2876.jpg
http://i129.photobucket.com/albums/p217/danameisoj/100_2877.jpg
http://i129.photobucket.com/albums/p217/danameisoj/100_2878.jpg
http://i129.photobucket.com/albums/p217/danameisoj/100_2879.jpg

For those who wish to post that jdm swaps can be had for this price . rews with tranny are 2200 with ( low miles 60k lol) thats alot for a turbo rotary.


BTW THE PICTURES ARE FROM 9/08. camera went dead
RB240Mike
09-21-2008, 09:58 PM
good luck oj!
danameisoj
11-16-2008, 10:34 AM
my car was sold. . i have this laying around and it needs to go.. accepting all types of offers.
jm88rx7
11-16-2008, 01:16 PM
whats left
danameisoj
11-16-2008, 09:35 PM
what i have posted is what i have ..

Motor , trans, with all the misc stuff goes with it .
jm88rx7
11-16-2008, 11:28 PM
How about the Harness?
danameisoj
11-17-2008, 12:09 AM
harness went with the car so it can be converted
jm88rx7
11-17-2008, 12:33 AM
pm sent
a10secstreetcar
11-19-2008, 01:00 AM
$1200 low compression and no Turbos? GLWS!
danameisoj
11-19-2008, 09:47 PM
$1200 no tranny and low compression and no Turbos? GLWS!

good job . U suck at reading!

tranny is included with a very low mileage centerforce clutch.
TheCamel
11-20-2008, 12:28 AM
What are the compression readings you are getting on both rotors?
And how was the compression reading done?
danameisoj
11-20-2008, 08:30 PM
it was over 100 on each face on the rear and the front got a consistant 70ish.

the pin was removed from the tester.

i cannot replicate the compression reading since the motor is now layin on a pallot.
the reading was done before it was pulled.

motor was running fine . it was just removed to freshen it up since the readings were unsatisfactory. It was a recent build but to my belief the spring collapsed under the seals
a10secstreetcar
11-20-2008, 11:42 PM
U SUCK AT LIFE.. OVER PRICED EVEN WITH TRANNY.. FREE BUMP 4 U!


I swear I didnt see the tranny stuff.. Must have been tired. ;)