is this enough?

[a8j23c88]

amp specs-
Features:


Max Power (Watts): 1300
Class D Digital Mono Block
600W x 1 into 4 ohms, 20Hz-20kHz, 1.0% THD
Variable 50-300Hz Lo-Pass Filter
-12/-24dB/oct Selectable Slope
900W x 1 into 2 ohms, 20Hz-20kHz, 1.0% THD
Ad Hoc Power into 4 ohms, THD%: 600
Ad Hoc Power into 2 ohms, THD%: 900
Signal to noise ratio (dB): 65dBA
Frequency Response (Hz): 5-300Hz
Current Drain at rated output (A): 50A
Width (inch): 15.8
Height (inch): 2.2
Depth (inch): 10.8
to push one 12" kicker L5 (up to 600 watts rms rated)
impendance- dual 2ohm

[losermagnet4112]

I would have gone with the dual 4 so you could drop it to 2ohms and paired it with a kicker zx750.1

[jermwarfare]

perfect match up ,series the sub to 4 ohms then run it mono/bridged into the amp witch will do 600 rms, the sub handles 600 rms

[pnrcaraudio]

I did not see the model and brand of the amp but if the specs are correct then it is a good match