PDA

View Full Version : Does anyone..........

FearThe4Doors
08-12-2002, 03:11 AM
Know of anyone who has a Hurst Quarter stick or a B&M Pro stick shifter for sale?

http://www.jegs.com/photos/13080706.jpg

http://www.jegs.com/images/products/qstick_large.jpg
FearThe4Doors
08-12-2002, 03:12 AM
or maybe one i could borrow or look at
leadfootedfool
08-12-2002, 02:21 PM
ummm, perty.

Is that for the spirit????
FearThe4Doors
08-12-2002, 02:29 PM
maybe.. if i can get one and modify the plate to work with 413s
leadfootedfool
08-12-2002, 02:31 PM
Originally posted by "FearThe4Doors"

maybe.. if i can get one and modify the plate to work with 413s

that sounds complicated......
FearThe4Doors
08-12-2002, 02:37 PM
i dont think so.. they have different "pattern" plates for ford, chevy, dodge, fwd & reverse pattern. The 727/904 ones are close to 413s, but not exact. So if i can make my own plate based on the 727/904 ones... i'm good!
leadfootedfool
08-12-2002, 02:46 PM
just be sure you're not parked near anything when you try it out for the first time.

d might be r and so forth.......
CrazyMoparGirl
08-12-2002, 08:37 PM
I thought I saw those at A&E and Pep boys, I know of a Purdier shifter
FearThe4Doors
08-13-2002, 01:56 AM
i dont want a new one though.

And what do you know of?
CrazyMoparGirl
08-13-2002, 02:23 AM
They make a Pistol Grip version
FearThe4Doors
08-13-2002, 11:53 AM
dammit! just find me one! This wasnt a comments and suggestions thread about the shifter!!!

lol
rb70383
08-13-2002, 11:54 AM
what? find the pistol grip style?
FearThe4Doors
08-13-2002, 12:13 PM
any actually.


http://www.jegs.com/photos/5303162001.jpg
rb70383
08-13-2002, 12:27 PM
so you need the shifter plate to copy?
FearThe4Doors
08-13-2002, 12:46 PM
yeah, i wanted to look at one and see if the shifter plate works how i think it does. Then remove it and make another one which has the 413 pattern, put it in, and hope it works. Then maybe sell the plates or something.

I know for the B&M ones,you buy the shifter, then get different plates. Hurst just sells theirs for each application.. the plate may be riveted it on something.

Thats why i dont want to buy a new hurst, then find i cant remove the plate.
BIG_Truck_Driver
08-13-2002, 01:03 PM
I would stay away from the B&M ones, I've heard of the reverse lockouts failing and general build quality issues.
FearThe4Doors
08-13-2002, 01:17 PM
thanks for the tip!
rb70383
08-13-2002, 01:19 PM
ok so why wont the plates work? The spacing between the detens?. Worst case, just change the ratio on the lever on the tranny to either increase or decrease the throw.
FearThe4Doors
08-13-2002, 01:47 PM
from what i heard.. yes, the detens are off by a little bit. I dont know if the overall "length" from P to 1 is longer or shorter, so some are right on and some are off, or what.. Thats why i wanted to get one and check it out
flybyuin2.2
08-13-2002, 08:23 PM
go with Cheetah shifter the 1 Mopars use,man i want 1 of them, had a B&M Pro ratchet shifter it was nice a full ratchet action with no levers to shift into 3rd gear like most use much more reliable than other B&M's i had it for 4 years and never missed a gear probably 1 of best B&M makes :wink: