so i bought me a saleen max grip. with the stock 31 spline supiour axels. i was wondering if any one else has put this in a non saleen car. i would really like to know what all i need to run it. and if theres anything special im going to need to get.

 

I have NOT used it and I don't know of anyone that has. My understanding is, "it uses a small pump inside to put a hydraulic squeeze on a clutch pack that dramatically improves the handling characteristics of the entire vehicle." If that it is all it does, it should work in any 8.8. There is nothing different about the 8.8 axle housing in a Saleen or a stock mustang.

I am not sure if you are aware, but stock axles are 28 spline, not 31. So I am going to assume that the differential is also 31 spline.

Take some pictures of the swap and let us know how it works out...

 

ya the diff is a 31 spline and uses a special set of supiour axels that only work with that diff

 

so i got it all in there and im thinking that im going to have to have some shims made. all the ones i got are to thick and im thinking the super thin ones are just not cutting it. aside from that it works great.