Skunk2 lowering springs. which springs go in the front? the shorter springs or the longer springs? sorry if its been answered already but i had no luck searching.

 

Lol yea this was just asked...thicker springs go up front usually...depending on what spring rates you ordered.

 

i just got off the phone with skunk2 and they told me the longer springs go in the front cause the drivetrain will cause the springs to compress and the shorter springs go in back. you think thats right lol? i know its their product and im sure they know what they're talking about but i want to be 100% sure b4fore i go and do this.

 

Which ones are the thicker springs? I would normally take the manufacturers word though lol

 

Just look at your stock springs to compare. Usually the taller springs go in the front.

Are you using the stock shocks? Do you have a spring compressor?

 

stock shocks should be good for awhile i had them on my 4 door for a good while and they rode fine, but i would definitely upgrade asap. as for what goes where like skunk 2 said the longer ones go in front.

 

sorry about thw late reply but i finally got around to putting them in. i went with skunk2's word and installed the shorter springs in the back, longer one's in the front like stated and it site perfect.

This thread has been answered. thanks!

 

Longer ones go in the front smaller thicker ones go in the back