my tranny grinds when i take the motor over 5g's..the clutch feels good but might be a lil wore out but its goes in gear perfect and shifts fine under 5 but if i go higher it grinds..i got to let it come back to idel before i can shift next gear..is that sycnros?
its b16 cable tranny.
7lbs flywheel
high pressure plate
tryin to figure it out..
thanks

 

First Change fluid, if it still grinds its synchros

 

+1

 

replace snycro/slider/hub, but you cant get parts for a jdm b16 cable tranny, so you are SOL lol.

 

deff. sounds like synchros and how old is pressure plate i had a pressure plate go bad and it did the same thing fine when driving normal but grind when on it or high rpm

 

I had the same problem on my hydro GSR trans.... I changed the fluid to GM Syncro Max and it went away all together.

 

it the tranny grinds, snycromesh just covers up the problem. it doesnt make it go away for good.

 

+1

but if you plan on replacing/rebuilding the tranny later on then it'll be fine for a little while.

 

yeh the persure plate is getting wore out..got a new one in the mail now..see if it does the trick...and im gonna put syncomesh in it tomarrow and see if it helps there too...